A2F500-DEV-KIT-2 Datasheet A2F500-DEV-KIT-2 | P1-P3

SmartFusion Development Kit

QSG0204 Quickstart Guide

Kit Contents – A2F500-DEV-KIT-2 (RoHS-compliant)

Overview

The SmartFusion Development Kit offers a full-featured development board for SmartFusion

customizable system-on-chip (cSoC) devices. These are the only devices that integrate an FPGA,

ARM

Cortex™-M3 microcontroller, and programmable analog, offering full customization, IP

protection, and ease-of-use.

The device contains on-chip flash and SRAM memory, as well as additional off-chip memory on the

board. The board also contains LEDs, switches, and various features for extensive analog

experimentation, including voltage rail monitoring, current POT, temperature diodes, and voltage

sweeping using active bipolar prescalers (ABPS). Networking interfaces include Ethernet PHY,

EtherCAT, CAN, UART, and RS485.

Jumpers and Switch Settings

Jumpers and switches are set during the manufacturing and test of the development board. To

confirm settings, review the “Running the Manufacturing Test”. Any jumper connectors not noted

are open.

Quantity Description

1SmartFusion

Development board with A2F500M3G-FGG484ES

1 Low-cost programming stick (LCPS)

2 USB 2.0 A to mini-B Cable

1 5 V power supply with international adapters

SmartFusion Development Kit Quickstart Card

SW9 must be off (JTAGSEL = H) in order to program the SmartFusion device. SW9 remains in the

off position for Libero

software and SoftConsole programming.

For a full description and location of all jumpers, refer to the SmartFusion Development Kit User’s

Guide.

Running the Manufacturing Test

You can run the manufacturing test to verify the device and board connections. The manufacturing

test files are available from the SmartFusion Development Kit page. Instructions on how to run the

test are available in the SmartFusion Development Kit User’s Guide.

Connecting the Board

Follow the steps below to connect the board:

1. Connect one of the USB cables from the PC to the USB connector on the board.

2. Connect the LCPS to the PC via a USB cable.

3. Connect the LCPS to the programming header on the board.

4. Connect the 5 V power supply to the board.

Factory Default Factory Default Factory Default

JP1: 1–2 JP12: 1–2 JP21: 1–2

JP2: 1–2 JP13: 1–2 JP22: 2–3

JP4: 1–3; 7–9 JP14: 1–2 JP23: 1–2

JP5: 1–2; 3–4 JP15: 1–2 JP24: 1–2

JP6: 2–3 JP16: 2–3 JP27: 1–2

J7: 2–3; 6–7; 10–11; 14–15 JP17: 2–3 JP28: 1-2

JP7: 1–2 JP18: 1–2 J32: 1–2; 3–4; 5–6

JP8: 3-4; 7-8; 11-12; 15-16 JP19: 2–3 –

JP11: 1-2 JP20: 1–2 –

SmartFusion Development Kit Quickstart Card

SmartFusion Device JP16 JP24

A2F500

Connector

JTAG Chain

Configuration Header

(JP5)

DB9 Connector

for CAN0

DB9 Connector

for CAN1

DIP Switch

RealView® Header

JTAG_SEL Switch

JP11, JP12

JP7

LCPS

Connector

DB9 Connector

for RS485 (UART1)

PUB Switch

1.5 V Header (JP6)

I2C Headers (J7)

USB Connector for UART0

JP22, JP23

JP18

Push-button Switches

SPI Headers

(JP8)

J32

DAC0 and DAC1

Callibration POTS

for ± 15 V Bipolar Outputs

JP13

Mixed Signal

Header

DACOUT/ADC

Headers (JP4)

POT for

Current Monitor

JP14, JP15, JP21,JP27

DirectC

Header (J13)

RJ45 Connectors

for EthernetCAT

Ports

JP30

RJ45 Connectors

for 10/100 Ethernet

10/100 Ethernet

Board Reset Switch

JP31

JP20

JP1, JP2

Power Jack

Power Switch

Memory Device

Configuration Headers

(JP17, JP19)

IGLOO PLUS

Header

JP28

AGLP DIP

Switch

PHY

P1-P3 P4-P4

A2F500-DEV-KIT-2

Mfr. #:

Buy A2F500-DEV-KIT-2

Manufacturer:

Microchip / Microsemi

Description:

Programmable Logic IC Development Tools SmartFusion DEV KIT Revision2 A2F500M3G-FGG484

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

A2F500-DEV-KIT-2