PROTECTION PRODUCTS
1
www.semtech.com
PROTECTION PRODUCTS - RailClamp
®®
®®
®
RClamp2431T
Ultra-Low Capacitance
1-Line ESD protection
Description
Features
Dimensions Schematic & PIN Configuration
Revision 01/27/2010
RailClamp
®
TVS diodes are specifically designed to
protect sensitive components which are connected to
high-speed data and transmission lines from overvolt-
age caused by ESD (electrostatic discharge), CDE
(cable discharge events), and EFT (electrical fast
transients).
The RClamp
®
2431T has a typical capacitance of only
0.35pF. This allows it to be used on Wi-Fi, RFID, and
other circuits operating in excess of 3GHz without
signal attenuation. It may be used to meet the ESD
immunity requirements of IEC 61000-4-2.
The RClamp2431T is in a 2-pin SLP1006P2T package
measuring 1.0 x 0.6 x 0.4mm. The leads are spaced
at a pitch of 0.65mm and feature a lead-free finish.
Each device will protect one high-speed line operating
up to 24 volts. It gives the designer the flexibility to
protect single lines in applications where arrays are
not practical. The combination of small size, low
capacitance, and high ESD surge capability makes it
ideal for use in portable equipment such as cellular
phones and netbooks.
Applications
Mechanical Characteristics
Cellular Handsets & Accessories
Wi-Fi Interfaces
FeliCa / RFID
Firewire
FM Antenna
Netbooks
Serial ATA
Transient protection for data lines to
IEC 61000-4-2 (ESD)
IEC 61000-4-4 (EFT)
Ultra-small package (1.0 x 0.6 x 0.4mm)
Protects one data line or one I/O pair
Low capacitance: 0.35pF (Typical)
Low clamping voltage
Low operating voltage: 24V
Solid-state silicon-avalanche technology
SLP1006P2T package
Molding compound flammability rating: UL 94V-0
Marking: Marking code
Packaging : Tape and Reel
Lead Finish: NiPdAu
Pb-Free, Halogen Free, RoHS/WEEE Compliant
SLP1006P2T (Bottom View)
Nominal Dimensions (mm)
0.65
0.40
0.60
1.0