https://www.phoenixcontact.com/pi/products/1404418
08/20/2018Page2/4
Power connectors-SACC-M12FS-5CON-PG11-M PWR-1404418
Technical data
General
Rated current at 40°C 8 A (Contact 5: 2 A)
when using 1.5 mm² conductors
Rated voltage 60 V DC
48 V AC
Number of positions 5
Color handle area black
Insulation resistance > 10 GΩ
Coding A - standard
Standards/regulations M12 connector IEC61076-2-101
Status display No
Overvoltage category II
Degree of pollution 3
Connection method Screw connection
Conductor cross section 0.75 mm² ... 1.5 mm² (without ferrule)
0.75 mm² ... 1.5 mm² (with ferrule)
0.75 mm² ... 1.5 mm² (solid)
Conductor cross section AWG 18 ... 16 (without ferrule)
16 ... 18 (with ferrule)
Insertion/withdrawal cycles ≥ 100
Torque 0.4 Nm (M12 knurl)
1.5 Nm ... 2 Nm (Pressure screw with sleeve housing)
0.4 Nm (Screw plug insert with sleeve housing as far it will go)
0.2 Nm (Screw terminal blocks)
Assembly instructions The wires can be connected both with ferrules and without ferrules
Material
Flammability rating according to UL 94 V0
Contact material CuZn
Contact surface material Ni/Au
Contact carrier material PA
Material of grip body PA
Material, knurls Zinc die-cast, nickel-plated
Sealing material Viton (M12 socket)
NBR (Cable clamping)
Standards and Regulations
Standard designation M12 connector
Standards/regulations IEC61076-2-101
Flammability rating according to UL 94 V0
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
