2
Technical Data 10450
Effective December 2015
FP1008L
High frequency, high current power inductors
www.eaton.com/elx
Product Specifications
Part Number
8
OCL
1
(nH) ±10%
FLL
2
(nH) minimum
I
rms
3
(amps)
I
sat
1
4
(amps)
I
sat
2
5
(amps)
I
sat
3
6
(amps)
DCR (mΩ)
@ 20°C K-factor
7
L1 Version
FP1008L1-R100-R 100 72 65 75 65 63 0.17 ±5% 461
FP1008L1-R150-R 150 108 65 50 44 42 0.17 ±5% 461
L2 Version
FP1008L2-R150-R 150 108 65 65 57 55 0.17 ±15% 411
1. Open Circuit Inductance (OCL) Test Parameters: 100kHz, 0.1Vrms, 0.0Adc, @ +25°C
2. Full Load Inductance (FLL) Test Parameters: 100kHz, 0.1Vrms, @ I
sat
1, @ +25ºC
3. I
rms
: DC current for an approximate temperature rise of 40°C without core loss. Derating is necessary for AC currents.
PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the
temperature rise. It is recommended that the temperature of the part not exceed 125°C under worst case operating
conditions verified in the end application.
4. I
sat
1
: Peak current for approximately 20% rolloff @ +25°C
5. I
sat
2
: Peak current for approximately 20% rolloff @ +100°C
6. I
sat
3
: Peak current for approximately 20% rolloff @ +125°C
7. K-factor: Used to determine B
p-p
for core loss (see graph). Bp-p = K * L * ΔI * 10
-3
B
p-p
: (Gauss),
K: (K-factor from table), L: (Inductance in nH), ΔI (Peak to peak ripple current in Amps).
8. Part Number Definition: FP1008Lx-Rxxx-R
FP1008L = Product code and size
x= Version indicator
Rxxx= inductance value in μH, R= decimal point ,
-R suffix = RoHS compliant
Dimensions (mm)