KHS-17A12-120 Datasheet KHS-17A12-120, KHS-17D11-24 | P1-P3

Specifications and availability subject to change without notice.

13CXXXX Printed in U.S.A. PX/X-XX

Siemens Electromechanical Components, Inc.

Potter & Brumfield Products Division

200 S. Richland Creek Drive

Princeton, IN 47671-0001

Contact Ratings

Resistive Rating

Minimum Maximum

1 Silver 100mA @ 3A @

12VAC/12VDC 120VAC/28VDC

2* Silver-cadmium 500mA @ 5A @

oxide 12VAC/12VDC 120VAC/28VDC

3 Gold-silver-nickel 10mA @ 2A @

12VAC/12VDC 120VAC/28VDC

4 Palladium 100mA @ 3A @

12VAC/12VDC 120VAC/28VDC

5 Silver alloy 500mA @ 3A @

12VAC/12VDC 120VAC/28VDC

6 Bifurcated cross bar, Dry circuit 1A @

gold overlay silver 120VAC/28VDC

8 Gold diffused silver 50mA @ 3A @

12VAC/12VDC 120VAC/28VDC

Note: Relays should only carry a maximum of 15 amps continuously for all poles combined.

*Note: KHS hermetically sealed version maximum rating is 5A @ 120VAC/28VDC.

File E22575

File LR15734

KHA series

General Purpose

Dry Circuit to 5A

Multicontact

AC or DC Relay

Contact

Code

Material

KHS KHAU

Coil Data

AC Coils

DC Coils

Resistance Nominal Resistance Nominal

Nominal in Ohms Inductance in Ohms AC Current

Voltage ±10% @ in Henrys ±15% in mA

5 32 .072 — —

6 40 .08 10.5 200

12 160 .28 43 100

24 650 1.0 160 52

48 2,600 4.5 668 25

90 9,000 13.5 — —

110 * 11,000 17.0 — —

120 * 13,500 — 3,900 11.0

240 — — 12,000 6.0

*Note: For 220 and 240VDC, use series dropping 5W resistor of 11,000Ω.

Coil Data @ 25°C

Voltage: From 6 to 120VDC, and 6 to 240VAC, 50/60 Hz.

Nom. Power: DC coils - 0.9 watt; 0.5 watt minimum operate @ 25°C.

AC coils - 1.2 VA; 0.55 VA minimum operate @ 25°C.

Max. Power: DC coils - 2.0 watts @ 25°C.

Duty Cycle: Continuous.

Initial Breakdown Voltage: 500V rms, 60 Hz.

Operate Data @ 25°C

Must-Operate Voltage: DC: 75% of nominal voltage.

AC: 85% of nominal voltage.

Operate Time: 13 milliseconds typical @ nominal voltage (excluding

bounce).

Release Time: 6 milliseconds typical @ nominal voltage (excluding

bounce).

Environmental Data

Temperature Range: -45°C to +70°C operate.

-60°C to +130°C storage.

Mechanical Data

Mountings: #3-48 stud, sockets with printed circuit or solder terminals,

or bracket plate with #6-32 threaded stud.

Termination: Printed circuit or solder/socket terminals.

Printed circuit terminals are available for KHS on a special

order basis.

Insulating Material: Molded high-dielectric material.

Enclosures: See Ordering Information table.

Cover colors are available in black, red, blue, yellow and

green by special order.

Weight: 1.6 oz. approx. (45g).

Features

• Miniature size from 2 pole to 4 pole. A 5 pole version is available as a

special order.

• KHS hermetically sealed version UL Approved for Class 1 Division 2

hazardous locations.

• Various applications include process control, photocopier, and data

processing.

• Low cost, semiautomated construction.

Contact Data @ 25°C

Arrangements: 2 Form C (DPDT), 4 Form C (4PDT).

Expected Life: 10 million operations, mechanical; 100,000 operations min.

at rated loads. Ratings are based on tests of relays with

ungrounded frames.

Initial Breakdown Voltage: 500V rms, 60 Hz., between open contacts.

1240V rms, 60 Hz., between all other

elements.

KHAE-17D12-24

KHAU-11A11-120

KHAU-11D11-24

KHAU-17A11-12

KHAU-17A11-24

KHAU-17A11-120

KHAU-17A11N-120

KHAU-17A12-120

KHAU-17A13-120

KHAU-17A16-24

KHAU-17A16-120

KHAU-17A18-120

KHAU-17D11-6

KHAU-17D11-12

Ordering Information

Stock Items - The following items are normally maintained in stock for immediate delivery.

Typical Part No. B KHA U -17 A 1 1 B -24

1. Basic Series: (See Note 1)

2. Type:

E =

Printed circuit terminals, nylon dust cover, contacts rated opposite polarity (UL & CSA).

F =

Printed circuit terminals, nylon dust cover, contacts rated same polarity (UL & CSA).

S = Solder terminals, hermetically sealed steel case (UL & CSA). Note: Do not ground

KHS frame without consulting factory for load levels. (Order as KHS, not KHAS.)

U = Solder terminals, clear polycarbonate dust cover, contacts rated same polarity

(UL & CSA).

X = Solder terminals, clear polycarbonate dust cover, contacts rated opposite polarity

(UL & CSA).

3. Contact Arrangement:

11 = 2 Form C (DPDT)

17 = 4 Form C (4PDT)

4. Operating Coil:

A = AC D = DC

5. Mounting and Termination:

Relay Type E F S U X

Available Codes 1 1 1, 2, 1, 3, 1, 3,

3, 4 4, 9 4, 9

1 = Socket mount, solder terminals on S, U, X types; printed circuit terminals on E, F types.

2 = Mounting plate with stud on broad side, solder terminals.

3 = Mounting plate with stud on narrow side, solder terminals.

4 = Mounting plate with stud on dust cover end, solder terminals.

9 = Socket mount, without stud.

6. Contact Material:

Relay Type E F S U X

Available Codes 1, 2, 3, 1, 2, 3, 1*, 2*, 1, 2, 3, 1, 2, 3,

5, 6, 8 5, 6, 8 3, 5, 5, 6, 8 5, 6, 8

*UL Rated 1/10 HP, 3A, 120VAC when used with mounting & termination 1.

1 = Silver. 3 = Gold-silver-nickel. 5 = Silver alloy.

2 = Silver-cadmium oxide. 4 = Palladium. 6 = Bifurcated crossbar, gold overlay silver. 8 = Gold diffused silver.

7. Options Available (None available with contact arrangement 20.):

Relay Type E F S U X

Available Codes B (DPDT only) B None B B (DPDT only)

H H (DPDT only)

B = Push to test button.

N = Neon indicator. Only available with 120VAC or 110VDC coils. Not available with mounting & termination 4 or 8.

H = Neon indicator and push to test button. Only available with 120VAC or DC coils. Not available with mounting & termination 4 or 8.

L = LED indicator. Only available with 6-48VDC coils.

M = LED indicator and push-to-test button. Only available with 6-48VDC coils.

8. Coil Voltage:

6, 12, 24, 48, 120, 240**VAC

6, 12, 24, 48, 90, 110, 120VDC **240VAC coil is not available on KHS type relays.

Note 1: All KHA models available in KH construction. Specify KH instead of KHA.

KHAU-17D11-24

KHAU-17D11-48

KHAU-17D11-110

KHAU-17D12-12

KHAU-17D12-24

KHAU-17D12-48

KHAU-17D12-110

KHAU-17D13-24

KHAU-17D16-12

KHAU-17D16-24

KHS-17A11-24

KHS-17A11-120

KHS-17A12-120

KHS-17A13-120

KHS-17D11-12

KHS-17D11-24

KHS-17D11-48

KHS-17D11-110

KHS-17D12-12

KHS-17D12-24

KHS-17D13-24

KHU-17A11-12

KHU-17A11-24

KHU-17A11-120

KHU-17A11N-120

KHU-17A12-120

KHU-17A13-120

KHU-17A16-120

KHU-17A18-120

KHU-17D11-5

KHU-17D11-6

KHU-17D11-12

KHU-17D11-24

KHU-17D11-48

KHU-17D11-110

KHU-17D12-12

KHU-17D12-24

KHU-17D16-24

KHU-17D18-24

Specifications and availability subject to change without notice.

13CXXXX Printed in U.S.A. PX/X-XX

Siemens Electromechanical Components, Inc.

Potter & Brumfield Products Division

200 S. Richland Creek Drive

Princeton, IN 47671-0001

.180 DIA. BOSSES

(4.57)

.265 ± .046

(6.73 ± 1.17)

1 2 3 4

5 6 7 8

9 10 11 12

.859 MAX.

(21.82)

.168 ± 020

(4.27 ± .51)

.168

(4.27)

1.109 MAX.

(28.17)

.421 ± .046

(10.69 ± 1.17)

.525

(13.34)

.263

(6.68)

.313

(7.95)

.022 ± .015

(.56 ± .38)

.797 ± .020

(20.24 ± .51)

.040 ± .010

(1.02 ± .25)

.250

(6.35)

.125 DIA.

(3.18)

1.281 MAX.

(32.54)

1.600 MAX WITH

INDICATOR LAMP

(38.10)

#3-48 THREAD

.312 ± .031

(7.92 ± .79)

.219

(5.56)

.050 DIA.

TYPICAL

(1.27)

.15

(3.81)

Printed circuit terminal thickness .022 (.558)

.200 (5.08) terminal length available on special order

.112

(2.84)

.052 REF.

(1.32)

.047

REF.

(1.19)

.750

(19.05)

Recommended Chassis Cutout

For Stud Mount

Mounting

Code 3

Mounting

Code 4

Stud On

Narrow Side

Stud On

End

.437

(11.10)

.547

(13.89)

.156

(3.96)

.375 REF.

(9.53)

#6-32

THREAD

.085 MAX.

(2.16)

.645

(16.38)

+ = Polarity for LED indicator or diode suppression if ordered special.

.859 MAX.

(21.82)

1 2 3 4

5 6 7 8

9 10 11 12

.421

(10.69)

1.109 MAX.

(28.17)

.525

(13.34)

.263

(6.68)

.168

(4.27)

.022

(.56)

.265

(6.73)

.750

(19.05)

.000 - .010

(.00 - .25)

.312

(7.92)

#3-48

THREAD

.25

(6.4)

1.281 MAX.

(32.54)

.250 + .015

(6.35 ± .38)

#3-48 THREAD

1.281 MAX.

(32.54)

.312 + .031

(7.92 ± .79)

.281 REF.

(7.14)

1.156 MAX.

(29.36)

.525 REF.

(13.34)

.263 REF.

(6.68)

.45 REF.

(11.4)

.910 MAX.

(23.11)

.022 REF

(.56)

Wiring Diagrams (Bottom Views)

PC Board Layout (Bottom View)

Outline Dimensions

Mounting Code 1 - KHAU and KHAX only. Mounting Code 1 - KHS only.

PC terminal models have rivet, not stud.

Max. seated height in 27E006 socket is

1.37" (34.8mm).

2 & 4 Pole

Class 1 Div. 2 Group A, B, C & D Hazards

Mounting Code 1 - Neon Indicator, Push-To-Test.

KHS Printed Circuit

Terminals

(Special Order)

.660

(16.76)

.158

(4.01)

.770

(19.56)

.022

(.56)

.263

(6.68)

.525

(13.34)

.201 DIA

(5.11)

2 HOLES

.130 DIA.

(3.30)

2 & 4 Pole

.160

(4.06)

PLACES

.070 DIA.

(1.78)

.410

(10.41)

.660

(16.76)

.175

(4.45)

.350

(8.89)

.525

(13.34)

For KHAE, KHAF Relays

with PC terminals

and sockets with

PC terminals

2 Pole 4 Pole

Printed Circuit

Terminals

Mounting Code 2 - Stud On Broad Side.

P1-P3 P4-P4

KHS-17A12-120

Mfr. #:

Buy KHS-17A12-120

Manufacturer:

TE Connectivity

Description:

KHS-17A12-120=KH 9-1393122-8 D711

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

KHS-17A12-120

KHS-17A12-120

Products related to this Datasheet