DC/DC CONVERTERS High Current, High Efficiency, Low Profile 1
2 YEAR WARRANTY
NEW Product
All specifications are typical at nominal input, full load at 25°C ambient unless otherwise stated
SPECIFICATIONS
File Name: eighth_brick.pdf Rev (05): 21 Jun 2004
• Ultra-high efficiency topology
•
Industry standard eighth brick footprint (identical to quarter-brick pinout)
• Low profile through-hole version
•
Low profile with 38% space savings over other quarter-brick brick converters
• Wide ambient temperature range, -40ºC to +85ºC
• 80% to 110% output trim
• Monotonic start-up in normal and prebiased loads
• Basic insulation system
• Overvoltage and overtemperature protection
• Secondary side control, no optocouplers,
fast transient response
• 100V, 100ms input voltage transient rated
Eighth-Brick Series
Single output
OUTPUT SPECIFICATIONS
Voltage adjustability 80% to 110%
Minimum load 0%
Overshoot At turn-on and turn-off None
Undershoot None
Transient response 60mV to 120mV typ. deviation
(See Note 1) 20µs recovery
INPUT SPECIFICATIONS
Input voltage range 48V nominal 36 to 75VDC
Input current No load 50mA
Remote OFF 5mA
Active high remote ON/OFF
Logic compatibility Open collector ref to -input
ON Open circuit or >2.4VDC
OFF <0.4VDC
Undervoltage lockout Power up 35.5V (typ.)
Power down 33.5V (typ.)
Start-up time Power up 15ms (typ.)
(See Note 2) Remote ON/OFF 15ms (typ.)
TÜV
This is a new high efficiency, open-frame, low profile, single board, isolated DC/DC
converter series in an industry standard eight-brick footprint that provides up to 100W of
output power. The series delivers very high output current at low voltages, and excellent
useable power for today’s high performance applications. The series features an input
voltage range of 36 to 75VDC and is available with output voltages of 1.2V, 1.5V 1.8V, 2.5V,
3.3V and 5.0V. The output voltage is adjustable from 80% to 110% of the nominal value. The
series also has a remote ON/OFF capability. Over-current, over-voltage and over-temperature
protection features are included as standard. Full international safety approval including
EN60950 VDE and UL/cUL60950, reduces compliance costs and time to market.
EMC CHARACTERISTICS
Immunity:
ESD air enclosure EN61000-4-2 8kV/6kV(O/P within spec.)
Radiated field enclosure EN61000-4-3 10V/m (O/P within spec.)
Conducted EN61000-4-6 10V (O/P within spec.)
Input transients 100V, 100ms
GENERAL SPECIFICATIONS
Basic insulation Input/output 2250VDC
Switching frequency Fixed 480kHz
Approvals and (See Note 3) EN60950 VDE
standards UL/cUL 60950
Material flammability UL94V-0
Weight 21g (0.73oz)
MTBF Telcordia Tech SR-332 4,034,120 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient. -40°C to +85°C
temperature
Non-operating -55°C to +125°C
PROTECTION
Short-circuit Continuous
Over-voltage Non-latching
Thermal 125ºC hot spot temperature with
automatic recovery
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. 60950-00 : UL 60950
File No. E135734
VDE Certificate No. 40005017
CB Report and Certificate to IEC60950, Certificate No. DE1-19783