TLP3103
2 2017-06-09
Absolute Maximum Ratings
(Ta
=
25°C)
Characteristics Symbol Rating Unit
LED
Forward current I
F
30
mA
Forward current derating (Ta ≥ 25°C) ΔI
F
/°C −0.3 mA/°C
Reverse voltage V
R
5
V
Diode power dissipation
P
D
50 mW
Diode power dissipation derating
(Ta ≥25°C)
P
D
/°C -0.5 mW/°C
Junction temperature T
j
125 °C
Detector
Off-state output terminal voltage V
60 V
On-state
current
A connection
I
ON
2.3
A B connection 2.3
C connection 4.6
Forward
current
derating
(Ta ≥ 50°C)
A connection
ΔI
ON
/°C
−30.7
mA/°C B connection −30.7
C connection −61.3
On-state current (pulsed)
(t = 100 ms)
I
ONP
7 A
Output power dissipation P
O
370 mW
Output power dissipation derating
(Ta ≥ 50°C)
ΔP
O
/ °C
−4.94 mW / °C
Junction temperature T
125 °C
Storage temperature T
−55 to 125 °C
Operating temperature T
−40 to 85 °C
Lead soldering temperature (10 s) T
260 °C
Isolation voltage (AC, 1 minute, R.H. ≤ 60%) (Note 1)
BV
1500 Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Device considered a two-terminal device: Pins 1 and 2 shorted together, and pins 4, 5 and 6 shorted
together.
Recommended Operating Conditions
Characteristics Symbol Min Typ. Max Unit
Supply voltage V
DD
― ― 60 V
Forward current I
F
― 7.5 20 mA
Operating temperature T
opr
-20 ― 65 °C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.