SPEC NO: DSAF2641 REV NO: V.5A DATE: APR/06/2015 PAGE: 2 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1101003934
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1. 1 / 10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
iewing
Angle [1]
Min. Typ. 2θ1/2
WP3VEYW
High Efficiency Red (GaAsP/GaP)
White Diffused
15 40
60
°
*10 *30
10 15
*10 *15
Yellow (GaAsP/GaP)
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength
High Efficiency Red
Yellow
627
590
nm I
F=20mA
λD [1] Dominant Wavelength
High Efficiency Red
Yellow
617
588
nm I
F=20mA
Δλ1/2 Spectral Line Half-width
High Efficiency Red
Yellow
45
35
nm I
F=20mA
C Capacitance
High Efficiency Red
Yellow
15
20
pF V
F=0V;f=1MHz
V
F [2] Forward Voltage
High Efficiency Red
Yellow
2
2.1
2.5
2.5
V I
F=20mA
I
R Reverse Current
High Efficiency Red
Yellow
10
10
uA V
R = 5V
Parameter High Efficiency Red Yellow Units
Power dissipation 75 75 mW
DC Forward Current 30 30 mA
Peak Forward Current [1] 160 140 mA
Reverse Voltage V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds
5
Notes:
1. θ1 / 2 is the angle from optical centerline where the luminous intensity is 1 / 2 of the optical peak value.
2. Luminous intensity / luminous Flux: + / -15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. Wavelength: + / -1nm.
2. Forward Voltage: + / -0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.