OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

APDS-9120-020

P1-P3P4-P6P7-P9P10-P12P13-P15
7
Tape and Reel Dimensions
9°
9° MAX
4.68 ± 0.10
4.68±0.10
0.28 ± 0.02
0.138 ± 0.10
Dimensions in mm
Ø1.00 ± 0.25
5.50 ± 0.05
1.75 ± 0.10
2.00 ± 0.05
4.00 ± 0.10
8.00 ± 0.10
Ø1.50 ± 0.10
12.0 ± 0.30
–0.10
Reel Drawings
8
SMT Assembly Application Note
1.1 Solder Pad, Mask and Metal Stencil Aperture
1.2 Recommended Land Pattern
Figure 11. Stencil and PCBA
Figure 12. Recommended Land Pattern
Metal Stencil For Solder
Paste Printing
Stencil
Aperture
Solder
Mask
Land
Pattern
PCBA
Notes:
1. Do NOT connect the NC (no connect) pins.
2. Manual soldering on APDS-9120 is not recommended.
Please refer to Recommended Reflow Profile for soldering.
4.7
4.4
Unit: mm
Tolerance: ±0.1mm
Land Pattern
4.7
4.4
1.2
1.2
1.0
1.15
0.4
1.20
0.8
0.9
R 0.2
9
1.3 Recommended Metal Solder Stencil Aperture
It is recommended that a 0.11 mm thick stencil be used for solder paste printing. Aperture opening for shield pad is
0.8mm x 0.4mm (as per land pattern). This is to ensure adequate printed solder paste volume and no shorting.
Figure 13. Solder Stencil Aperture
Figure 14. Adjacent Land Keepout and Solder Mask Areas
1.4 Adjacent Land Keepout and Solder Mask Areas
Adjacent land keep-out is the maximum space occupied by the unit relative to the land pattern. There should be no
other SMD components within this area.
The minimum solder resist strip width required to avoid solder bridging adjacent pads is 0.2 mm.
Note: Wet/Liquid Photo-Imageable solder resist/mask is recommended.
0.11
4.7
4.7
Unit: mm
Aperture Opening
5.7 mm
5.7 mm
Solder Mask Area
Min. 0.2 mm
P1-P3P4-P6P7-P9P10-P12P13-P15

APDS-9120-020

Mfr. #:
Buy APDS-9120-020
Manufacturer:
Broadcom / Avago
Description:
Proximity Sensors Proximity Sensor
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet