1.44kW Single-Phase Hot-Swap PDU, 120V 15A
Outlets (8 5-15R), 2 5-15P, 10ft & 6ft Cords 2U
Rack-Mount
MODEL NUMBER: PDUB15
Description
Tripp Lite’s Hot-swap PDU systems enable live-replacement of standard UPS systems for maintenance
with no interruption of connected server or networking loads. Dual input power cables support PDU
connection to separate Utility and UPS power sources. Manual transfer switch with lighted status
indicators controls the source of power to connected equipment between Utility and UPS. Set the switch
to UPS during normal operation and connected equipment will receive full-time conditioned power from
the UPS. Set the switch to Utility to momentarily power connected equipment from the Utility line cord and
bypass the UPS while the UPS system is removed and replaced with a fresh one. Once the new UPS is
up and running with all data and electrical connections restored, set the switch back to the UPS setting to
once again provide fully-conditioned UPS power to connected equipment.
Features
Tripp Lite Hot-swap PDU systems support live-replacement of standard UPS systems for maintenance
with no interruption of connected server or networking loads
●
PDUB15 is universally compatible with any Tripp Lite or other brand of 100-127V UPS rated up to
1500VA or 1440 watts with a NEMA 5-15P input cable
●
2U horizontal rackmount form factor compatible with 2 or 4 post racks
●
Supports space saving rear-post mounting in the same rack space as many Tripp Lite Rackmount UPS
systems (select installations, see manual)
●
Pair of attached 5-15P PDU input cables connect to separate Utility and UPS power sources
●
8 high quality 5-15R outlets support critical networking loads in both Utility and UPS operating modes
●
One additional 5-15R pass-through outlet supports UPS input power cord
●
Dual input power cables support PDU connection to separate Utility and UPS power sources
●
Highlights
Single phase 15A 120V Hot-
swap PDU
●
Enables live replacement of a
standard UPS with zero
downtime
●
2U horizontal rackmount
installation
●
Compatible with any 100-127V
UPS with a 5-15P input plug
●
Manual transfer switch controls
PDU input power source
●
Pair of 5-15P input cables
connect to separate Utility and
UPS inputs
●
8 Built-in 5-15R outlets
●
Package Includes
Hot-swap PDU System
●
2U mounting brackets
●
User manual with warranty
information
●
1 / 3