2
MAX SWAY
(EITHER DIRECTION)
DO NOT
SCALE FROM
THIS PRINT
.195 4.95
REF
.100
REF
2.54
"A"
"A"
01
02
.135
±.010
3.43
±0.25
.045
REF
1.15
.028
REF
0.72
.285
±.010
7.24
±0.25
SEE NOTE 2
SMH-50-D
SEE TABLE 1
.335 8.51
REF
) + .020[.51])
.010[.25]
((No OF POS x .100[2.54]
.031
x .016[.41]
0.79
REF (TYP)
SECTION "A"-"A"
SMH-1XX-XX-XX-X-XX
NO. OF POSITIONS
LEAD STYLE
ROW SPECIFICATION
-D: DOUBLE ROW (USE SMH-50-D)
(SEE FIG 1)
-S: SINGLE ROW (USE SSW-50-S)
(SEE FIG 2, SHT 2)
-02 THRU -36
(PER ROW)
-02: SURFACE MOUNT
(USE C-8-03-X)
-22: LOW INSERTION FORCE
(USE C-17-03-X)
PLATING
OPTIONS
-XX: INDICATES POSITION
POLARIZED (USE PK-06-N)
-TR: TAPE & REEL PACKAGING
(2 - 29 POSITIONS ONLY)
-G: 20µ" OVER IN CONTACT AREA, FLASH GOLD ON TAIL
-T: TIN OVER, MATTE TIN ON TAIL
-S: 30µ" OVER IN CONTACT AREA, MATTE TIN ON TAIL
-F: 3µ" OVER IN CONTACT AREA, MATTE TIN ON TAIL
-H: 30µ" OVER IN CONTACT AREA, FLASH GOLD ON TAIL
-L: 10µ" OVER IN CONTACT AREA, MATTE TIN ON TAIL
-TM: TIN OVER, MATTE TIN ON TAIL
-SM: 30µ" OVER IN CONTACT AREA, MATTE TIN ON TAIL
-FM: 3µ" OVER IN CONTACT AREA, MATTE TIN ON TAIL
POSITION 01
SEE SHEET 2 FOR IN-PROCESS VIEWS
FIG 1
SMH-120-XX-XX-D SHOWN
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01[.3] 2
.XXX:
.005[.13]
.XXXX:
.0020[.051]
MATERIAL:
.100 [2.54] HORIZONTAL SMT SOCKET ASSEMBLY
BY:
SMH-1XX-XX-XX-X-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
2/5/99
3
1
SHEET SCALE: 2:1
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
CONTACT: PHOSPHOR BRONZE
F:\DWG\MISC\MKTG\SMH-1XX-XX-XX-X-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. COPLANARITY: POSITIONS 02-24= .006[.15], POSITIONS 25-36= .008[.20].
3. BURR ALLOWANCE: .003[.08] MAX.
4. ONE POSITION WILL BE LOST FOR EVERY CUT MADE ON A SOCKET
STRIP: CUT FLASH TO BE .010 [.25] MAX WITH NO FLASH ALLOWED IN
HOLES OR EXTENDING BELOW LEADS
5. MINIMUM PUSHOUT FORCE: 1.5 LB.
6. MAXIMUM ALLOWABLE BOW: .003[.08] INCH/INCH AFTER ASSEMBLY.
7. ENDWALLS AFTER CUTTING: .045 +/-.003.
8. SHEAR TAILS TO DIMENSION SHOWN.
9. CONTACT TAILS TO BE FLUSH TO .003[.08] ABOVE OR BELOW A DATUM LINE
MADE BY THE INSULATOR. (-DH ONLY)
10. NOTE DELETED.
11. POSITIONS 4 OR LESS SHOULD BE LAYER PACKAGED UNLESS OTHERWISE NOTED IN THE PART CALLOUT.
12. NOTE DELETED.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION AF
