IRF36ER2R2K

IRF-36
www.vishay.com
Vishay Dale
Revision: 25-May-16
1
Document Number: 34057
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Inductors, Epoxy Conformal Coated, Axial Leaded
ELECTRICAL SPECIFICATIONS
Inductance Range: 0.27 μH to 1000 μH
Inductance Tolerance: ± 10 % from 0.1 μH to 1000 μH
standard, ± 5 % optional
Operating Temperature Range: -20 °C to +105 °C
Dielectric Strength: 250 V
RMS
MECHANICAL SPECIFICATIONS
Terminal Strength: Pull = 5 pounds, twist = 360 °C x 3
Protection: Epoxy uniform roll coated
Leads: Tinned copper
ENVIRONMENTAL SPECIFICATIONS
Maximum Temperature Rise: + 20 °C
FEATURES
High performance ferrite core is used in this
epoxy conformally coated choke which allows
for inductance values to 1000 μH
Axial lead type, small lightweight design
• Special magnetic core structure contributes to
high Q and self-resonant frequencies
Treated with epoxy resin coating for humidity resistance
to ensure long life
Heat resistant adhesives and special structural design for
effective open circuit measurement
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DIMENSIONS in inches [millimeters]
MODEL A (MAX.) B C (MAX.) D
IRF-36
0.394
[10.0]
2.480 ± 0.039
[63.0 ± 1.0]
0.157
[4.0]
0.026 ± 0.002
[0.65 ± 0.05]
A
C
Ø D
1st
2nd
3rd
4th
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IND.
(μH)
TOL.
(%)
Q
MIN.
TEST FREQUENCY
(MHz)
SRF MIN.
(MHz)
DCR MAX.
()
RATED DC CURRENT
(mA)
IRF-36 0.27 ± 20 % 25 25.2 250 0.24 1320
IRF-36 0.33 ± 20 % 25 25.2 240 0.28 1280
IRF-36 0.39 ± 20 % 25 25.2 230 0.32 1200
IRF-36 0.47 ± 20 % 25 25.2 220 0.36 1150
IRF-36 0.56 ± 20 % 25 25.2 215 0.41 1100
IRF-36 0.68 ± 20 % 25 25.2 210 0.47 1030
IRF-36 0.82 ± 20 % 45 25.2 172 0.24 980
IRF-36 1.0 ± 5 %, ± 10 % 45 25.2 140 0.24 920
IRF-36 1.2 ± 5 %, ± 10 % 50 7.96 140 0.27 880
IRF-36 1.5 ± 5 %, ± 10 % 50 7.96 131 0.30 830
IRF-36 1.8 ± 5 %, ± 10 % 55 7.96 121 0.32 790
IRF-36 2.2 ± 5 %, ± 10 % 55 7.96 110 0.35 750
IRF-36 2.7 ± 5 %, ± 10 % 60 7.96 100 0.35 720
IRF-36 3.3 ± 5 %, ± 10 % 65 7.96 94 0.35 670
IRF-36 3.9 ± 5 %, ± 10 % 65 7.96 86 0.37 640
IRF-36 4.7 ± 5 %, ± 10 % 70 7.96 80 0.39 620
IRF-36 5.6 ± 5 %, ± 10 % 70 7.96 74 0.43 590
IRF-36 6.8 ± 5 %, ± 10 % 75 7.96 68 0.48 550
IRF-36 8.2 ± 5 %, ± 10 % 70 7.96 53 0.52 530
IRF-36 10 ± 5 %, ± 10 % 70 7.96 45 0.58 500
IRF-36 12 ± 5 %, ± 10 % 70 2.52 34 0.63 480
IRF-36 15 ± 5 %, ± 10 % 70 2.52 20 0.72 460
IRF-36 18 ± 5 %, ± 10 % 65 2.52 14 0.77 430
IRF-36 22 ± 5 %, ± 10 % 40 2.52 9.9 0.84 410
IRF-36 27 ± 5 %, ± 10 % 55 2.52 7.6 0.94 390
IRF-36
www.vishay.com
Vishay Dale
Revision: 25-May-16
2
Document Number: 34057
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRF-36 33 ± 5 %, ± 10 % 55 2.52 6.3 1.03 370
IRF-36 39 ± 5 %, ± 10 % 50 2.52 6.3 1.12 350
IRF-36 47 ± 5 %, ± 10 % 45 2.52 6.3 1.22 340
IRF-36 56 ± 5 %, ± 10 % 40 2.52 6.2 1.34 320
IRF-36 68 ± 5 %, ± 10 % 40 2.52 5.7 1.47 306
IRF-36 82 ± 5 %, ± 10 % 35 2.52 5.3 1.62 290
IRF-36 100 ± 5 %, ± 10 % 30 2.52 4.8 1.80 275
IRF-36 120 ± 5 %, ± 10 % 70 0.796 3.8 3.7 185
IRF-36 150 ± 5 %, ± 10 % 70 0.796 3.5 4.2 175
IRF-36 180 ± 5 %, ± 10 % 70 0.796 3.3 4.6 165
IRF-36 220 ± 5 %, ± 10 % 70 0.796 3.0 5.1 155
IRF-36 270 ± 5 %, ± 10 % 65 0.796 2.8 5.8 146
IRF-36 330 ± 5 %, ± 10 % 65 0.796 2.6 6.4 137
IRF-36 390 ± 5 %, ± 10 % 65 0.796 2.4 7.0 133
IRF-36 470 ± 5 %, ± 10 % 60 0.796 2.25 7.7 126
IRF-36 560 ± 5 %, ± 10 % 60 0.796 2.10 8.5 120
IRF-36 680 ± 5 %, ± 10 % 55 0.796 1.95 9.4 113
IRF-36 820 ± 5 %, ± 10 % 55 0.796 1.85 12.0 100
IRF-36 1000 ± 5 %, ± 10 % 50 0.796 1.40 17.4 100
ORDERING INFORMATION
IRF-36
4.7 μH
± 10 % ER e3
MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC
®
LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
IRF36 ER 4R7 K
MODEL PACKAGE
CODE
INDUCTANCE
VALUE
INDUCTANCE
TOLERANCE
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IND.
(μH)
TOL.
(%)
Q
MIN.
TEST FREQUENCY
(MHz)
SRF MIN.
(MHz)
DCR MAX.
()
RATED DC CURRENT
(mA)
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

IRF36ER2R2K

Mfr. #:
Manufacturer:
Vishay
Description:
Fixed Inductors IRF-36 2.2 10% ER e3
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union