IMCSN-2000-48A

3M™
Medium-Wall Heat Shrink Tubing IMCSN
4 of 5
Maintenance
3MMedium-Wall Heat Shrink Tubing IMCSN is not impaired by freezing or overheating
due to ambient temperature found in storage or shipping. Normal
storage and stock rotation
are recommended.
Installation
Techniques
Exact instructions are available on a separate sheet. The following is a summary of
instructions:
1. Thoroughly clean and prepare cable.
2. Cut 3M IMCSN tubing to required size, per instructions.
3. Slide 3M IMCSN tubing onto cable.
4. Install connector, if applicable.
5. Center tubing.
6. Shrink tubing from center.
7. Heat until tubing is completely shrunk and adhesive/sealant (if applicable) is
squeezed from ends.
Availability
3M IMCSN tubing is available from your electrical distributor.
3M™
Medium-Wall Heat Shrink Tubing IMCSN
5 of 5
3M is a trademark of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on
information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this
product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks
and liability associated with such use. Any statements related to the product, which are not contained in 3M’s
current publications, or any contrary statements contained on your purchase order, shall have no force or
effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited
Remedy; Limited
Liability
This product will be free from defects in material and manufacture at the time of purchase.
3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M
product or refund the purchase price of the 3M product
. Except where prohibited by law, 3M will not be
liable for any direct, indirect, special, incidental or consequential loss or damage arising from this 3M
product, regardless of the legal theory asserted.

Electrical Markets Division
6801 River Place Blvd.
Austin, TX 78726-9000
800.245.3573
FAX: 800.245.0329
www.3M.com/electrical
Please recycle
© 3M 2017 All rights reserved
78-9237-0172-2 Rev B

IMCSN-2000-48A

Mfr. #:
Manufacturer:
Description:
Heat Shrink Tubing and Sleeves BK 48A PRINTED 5902000BK
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union