www.honeywell.com/sensing/products/di
S
HORT
L
ONGFELLOW
S
ERIES
•
LINEAR
POSITION
TRANSDUCER
TECHNICAL SPECIFICATIONS
Sensing and Control
Honeywell
100 Discovery Way
Acton, MA 01720 USA
Tel: (877) 384-1300; Fax: (978) 263-0630
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local
sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell
will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other
warranties, expressed or implied, including those of merchantability and fitness for a particular purpose.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer
to determine the suitability of the product in the application.
Item # 1098800 M.G. 10/01
MECHANICAL
Total Mechanical Travel See table below
Starting Force* 1 lb
Total Weight 0.26 to 0.49 lb
Vibration 20 g / 0.75 mm (rms) 5-2 kHz
Shock 50 g, 11 ms half sine
Backlash 0.001 in.
Life One Billion operations
ELECTRICAL
Theoretical Electrical Travel See table below
Independent Linearity** ±1.0% or ±0.1%
Total Resistance 1500 Ohms per inch
theoretical electrical travel
Resistance Tolerance ±20%
Operating Temperature -65° to 105° C
Resolution Infinite
Maximum Applied Voltage 40 Vdc
Recommended Wiper Current <1 µA
Electrical Connection Binder Series 681 Connector
or equivalent
* Starting Force for SLW 5 lbs. (2.3 kg)
** 5-95% of Theoretical Electrical Travel
Caution: Do not test on an Ohm Meter on the Rx 1 scale or other current devices.
Caution: Excessive Wiper Current can cause Output errors or damage.
Caution: Zero shaft side load is recommended to achieve maximum life.
0.90
(22.9)
0.45
(11.4)
X
Movable
mounting
brackets
7/16 in.
(6.6)
across
flats
1/4-28 NF-2A thread
1/4 in.
(6.3)
across
flats
1
5
0.06
(1.5)
0.45
(11.4)
0.90
(22.8)
0.90
(22.8)
1.36
(34.5)
0.45
(11.4)
1
2000 ohm
current limiting resistor
Shaft
Extended
2
3
0.154 (3.91)
(2 holes per bracket)
MOUNTING BRACKETS
1.35
(34.4)
1.75
(44.5)
0.88
(22.4)
0.68
(17.2)
0.19
(4.8)
0.38
(9.6)
DIMENSIONS
xx.xx = inches
(xx.x) = mm
SPECIALS AND ACCESSORIES
• Other Mechanical Travels
• Other Electrical Travels
• Other Resistance Values
• Rod and Bearings
• Ball Joint Assembly
• Other Linearity Values
Model Electrical Mechanical Total Body
Travel Travel Resistance Length ‘X’
in inches in inches in Ohms in inches
SLF01 or SLW01 1.0 1.20 1500 4.05
SLF02 or SLW02 2.0 2.20 3000 5.05
SLF03 or SLW03 3.0 3.15 4500 5.95
SLF04 or SLW04 4.0 4.15 6000 6.95
SLF06 or SLW06 6.0 6.15 9000 8.95
