https://www.phoenixcontact.com/pi/products/1648157
08/18/2018Page2/4
Contact insert-HC-B 6-I-CT-M-1648157
Technical data
General
Connection
For housing type B6. Connectors may only be inserted when there is no
load/the power is switched off. Use a screwdriver to remove the crimp
contacts. The opening for the screwdriver is next to the opening where
the conductor is inserted.
Ambient conditions
Ambient temperature (operation) -40 °C ... 125 °C (including heating up of contacts)
Degree of protection IP20
Material data
Contact material Copper alloy
Contact surface material Ag (alternatively Au)
Contact carrier material PA
Standards/regulations
PA: Fire protection in rail vehicles - requirement sets R22 and R23 acc.
to DIN EN 45545-2 (Risk level HL1 - HL2)
PA: Fire protection in rail vehicles - requirement set R24 acc. to DIN EN
45545-2 (Risk level HL1 - HL3)
Electrical characteristics
Rated voltage (III/3) 500 V
Rated surge voltage 6 kV
Rated current 16 A
Standards and Regulations
Connection in acc. with standard CSA
Constructional and testing regulations DIN EN 61984
DIN EN 60664
IEC 60352
Flammability rating according to UL 94 V0
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings