This is information on a product in full production.
October 2013 DocID025369 Rev 1 1/9
LCP03
Transient voltage suppressor for dual voltage SLIC
Datasheet − production data
Figure 1. Functional diagram
Figure 2. Pin-out configuration
Features
• Protection IC recommended for ringing SLICs
• Negative stand-off voltage: V
R
= - 53 V
• Positive stand-off voltage: V
R
= 83 V
• Peak pulse current: I
PP
= 60 A (5/310 µs)
• Holding current: I
H
= 150 mA min.
Applications
• Central office (CO)
• Private branch exchange (PBX)
• Digital loop carrier (DLC)
• Digital subscriber line access multiplexer
(DSLAM)
• Fiber in the Loop (FITL)
• Wireless local loop (WLL)
• Hybrid fiber coax (HFC)
• ISDN terminal adapter
• Cable modem
Description
The LCP03 has been developed to protect SLICs
operating on both negative and positive battery
supplies. It provides crowbar mode protection for
both TIP and RING lines. The surge suppression
is assumed for each wire by two thyristor
structures, one dedicated to positive surges the
second one for negative surges.
LCP03 can be used to help equipment to meet
various standards such as UL1950, IEC 60950 /
CSAC22.2, UL1459 and TIA-968-A (formerly FCC
part68). A Trisil™ meets UL94 V0. (Trisils are
UL497B approved - file: E136224).
TM: Trisil is a trademark of STMicroelectronics
TIP
NC
NC
RING
NC
GND
GND
NC
GND
TIP
NC
NC
RING
NC
NC
GND
www.st.com