CAT.No.2015/2016E
ELECTRIC DOUBLE LAYER CAPACITORS “DYNACAP”
DVL
®
5.5V SMD, Wide Temperature range Capacitors
Unit : mm
GREEN
CAP
85°C
DHL
Convert to chip
DVL
Specifications
ー 40 to ＋85
ー 20 to ＋80
0.047
45
0.1
45
0.22
45
5.5
5.5
5.5
0.047
0.1
0.22
DVL-5R5D473T-R5
DVL-5R5D104T-R5
DVL-5R5D224T-R5
12.5×10.5
12.5×10.5
12.5×10.5
L Max
(5.0) (5.0)(5.0)
0.3 Max
(1.2)
13±0.2
0.7±0.3
φD±0.5
13±0.2
Unit : mm
6.04.06.0
3.2
Marking color : White print on an brown sleeve
Outline Drawing Recommended land pattern size
Standard Ratings
●
Size : φ12.5×10.5mm, compatible with surface mounting.
●
Wide temperature range (−40 to 85℃), Low ESR.
●
Unlike batteries, safe and high reliability without containing active and
hazardous substance.
●
Unlike batteries, excellent charge and discharge characteristics with no
chemical reactions.
●
Responds to temperature 260℃ during the reflow peek.
＊
soldering conditions are described on page 191.
Item
Tolerance at rated capacitance (%)
Internal resistance
at 1 kHz
Characteristics at high
and low temperature
Category temperature range (℃)
Endurance (85℃)
Shelf life (85℃)
Applicable standards
Performance
Internal resistance (Ω Max.)
Percentage of capacitance change
Internal resistance
Test time
Percentage of capacitance change
Internal resistance
Rated capacitance (F)
1000 hours
Less than four times of the initial specified value
Within ±30% of the value at 20℃
Within ±30% of
the initial measured value
−40℃ : Less than seven times of the value at 20℃
85℃ : Less than five times of the value at 20℃
Test time : 1000 hours ; Same as endurance.
Conforms to JIS C5160-1 2009 (IEC 62391-1 2006)
ELNA Parts No.Max. operating voltage (V) Rated capacitance (F) φD×L (mm)
̶DVL
Series code
̶T104
Rated capacitance
symbol
D
Terminal
code
5R5
Max. operating voltage
symbol
R5
Taping
symbol
Part numbering system (example : 5.5V0.1F)
Part number is refer to following table.
EDLC
197
NOTE : Design, Specications are subject to change without notice.
It is recommended that you shall obtain technical specications
from ELNA to ensure that the component is suitable for your use.
®
ELECTRIC DOUBLE LAYER CAPACITORS “DYNACAP”
DVL
