1. General description
The 74ALVC573 is an octal D-type transparent latch featuring separate D-type inputs for
each latch and 3-state true outputs for bus-oriented applications. A latch enable (LE) input
and an outputs enable (OE) input are common to all latches.
When pin LE is HIGH, data at the D-inputs (pins D0 to D7) enters the latches. In this
condition, the latches are transparent, that is, a latch output will change each time its
corresponding D-input changes. When pin LE is LOW, the latches store the information
that was present at the D-inputs one set-up time preceding the HIGH-to-LOW transition of
pin LE.
When pin OE is LOW, the contents of the eight latches are available at the Q-outputs (pins
Q0 to Q7). When pin OE is HIGH, the outputs go to the high-impedance OFF-state.
Operation of input pin OE does not affect the state of the latches.
The 74ALVC573 is functionally identical to the 74ALVC373, but has a different pin
arrangement.
2. Features
■ Wide supply voltage range from 1.65 V to 3.6 V
■ 3.6 V tolerant inputs/outputs
■ CMOS low power consumption
■ Direct interface with TTL levels (2.7 V to 3.6 V)
■ Power-down mode
■ Latch-up performance exceeds 250 mA
■ Complies with JEDEC standards:
◆ JESD8-7 (1.65 V to 1.95 V)
◆ JESD8-5 (2.3 V to 2.7 V)
◆ JESD8B/JESD36 (2.7 V to 3.6 V)
■ ESD protection:
◆ HBM JESD22-A114E exceeds 2000 V
◆ MM JESD22-A 115-A exceeds 200 V
74ALVC573
Octal D-type transparent latch; 3-state
Rev. 03 — 26 October 2007 Product data sheet