Low Pin Count Demo Board User’s Guide
DS51556A-page 8 © 2005 Microchip Technology Inc.
1.4 LPC DEMO BOARD OVERVIEW
The Low Pin Count Demo Board Works with the PICkit™ 2 Microcontroller
Programmer to help the user get up to speed quickly using PICmicro
®
microcontrollers.
This user’s guide is written in the form of Lessons intended for a person with some
exposure to assembly language but has never used a PICmicro
®
microcontroller.
The LPC Demo Board overview is shown in Figure 1-1.
FIGURE 1-1: LPC DEMO BOARD
1.5 RUNNING THE PICkit™ 2 STARTER KIT DEFAULT DEMONSTRATION
The Low Pin Count Demo Board comes preprogrammed with a demonstration program.
To use this program, connect the PICkit™ 2 Starter Kit to the PC’s USB port using the
USB cable. Start the PICkit™ 2 Microcontroller Programmer application and check the
target power box. The demo program will blink the four red lights in succession. Press
the Push Button Switch, labeled SW1, and the sequence of the lights will reverse. Rotate
the potentiometer, labeled RP1, and the light sequence will blink at a different rate. This
demo program is developed through the first 7 lessons in this guide.
14-pin Expansion
Generous
Push Button
20-pin
Potentiomete
LEDs
PICkit™ 2 Programming Header
Header
Prototyping
Area
DIP Socket