AD7170BCPZ-500RL7

12-Bit Low Power Sigma-Delta ADC
Data Sheet
AD7170
Rev. B Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©20092015 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
Output data rate: 125 Hz
Pin-programmable power-down and reset
Status function
Internal clock oscillator
Current: 135 µA
Power supply: 2.7 V to 5.25 V
40°C to +10C temperature range
Package: 10-lead, 3 mm × 3 mm LFCSP
INTERFACE
2-wire serial (read-only device)
SPI compatible
Schmitt trigger on SCLK
APPLICATIONS
Pressure measurement
Industrial process control
Portable instrumentation
FUNCTIONAL BLOCK DIAGRAM
12-BIT Σ-Δ
ADC
AD7170
GND
INTERNAL
CLOCK
V
DD
REFIN(+)
AIN(+)
AIN(–)
REFIN(–)
DOUT/RDY
SCLK
PDRST
08416-001
Figure 1.
Table 1.
V
REF
= V
DD
RMS Noise P-P Noise
P-P
Resolution ENOB
5 V 11.5 μV 76 μV 12 bits 12 bits
3 V 6.9 μV 45 μV 12 bits 12 bits
GENERAL DESCRIPTION
The AD7170 is a very low power 12-bit analog-to-digital converter
(ADC). It contains a precision 12-bit sigma-delta (Σ-Δ) ADC
and an on-chip oscillator. Consuming only 135 μA, the AD7170
is particularly suitable for portable or battery operated products
where very low power is a requirement. The AD7170 also has a
power-down mode in which the device consumes 5 μA, thus
increasing the battery life of the product.
For ease-of-use, all the features of the AD7170 are controlled by
dedicated pins. Each time a data read occurs, eight status bits
are appended to the 12-bit conversion. These status bits contain
a pattern sequence that can be used to confirm the validity of
the serial transfer.
The output data rate of the AD7170 is 125 Hz, whereas the
settling time is 24 ms. The AD7170 has one differential input
and a gain of 1. This is useful in applications where the user
needs to use an external amplifier to implement system-specific
filtering or gain requirements.
The AD7170 operates with a power supply from 2.7 V to 5.25 V.
It is available in a 10-lead LFCSP package.
The AD7171 is a 16-bit version of the AD7170. It has the same
feature set as the AD7170 and is pin-for-pin compatible.
AD7170* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
EVALUATION KITS
AD7170 Evaluation Board
DOCUMENTATION
Data Sheet
AD7170: 12-Bit Low Power Sigma-Delta ADC Data Sheet
User Guides
UG-080: Evaluation Board for the AD7170 12-Bit, Low
Power Sigma-Delta ADC
SOFTWARE AND SYSTEMS REQUIREMENTS
BeMicro FPGA Project for CN0240 with Nios driver
CN0240 FMC-SDP Interposer & Evaluation Board / Xilinx
KC705 Reference Design
REFERENCE DESIGNS
CN0240
REFERENCE MATERIALS
Technical Articles
MS-2210: Designing Power Supplies for High Speed ADC
DESIGN RESOURCES
AD7170 Material Declaration
PCN-PDN Information
Quality And Reliability
Symbols and Footprints
DISCUSSIONS
View all AD7170 EngineerZone Discussions.
SAMPLE AND BUY
Visit the product page to see pricing options.
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
AD7170 Data Sheet
Rev. B | Page 2 of 14
TABLE OF CONTENTS
Features .............................................................................................. 1
Interface ............................................................................................. 1
Applications ....................................................................................... 1
Functional Block Diagram .............................................................. 1
General Description ......................................................................... 1
Revision History ............................................................................... 2
Specifications ..................................................................................... 3
Timing Characteristics ..................................................................... 5
Timing Diagrams .......................................................................... 5
Absolute Maximum Ratings ............................................................ 6
Thermal Resistance ...................................................................... 6
ESD Caution .................................................................................. 6
Pin Configuration and Function Descriptions ............................. 7
Typical Performance Characteristics ............................................. 8
Output Noise and Resolution Specifications ................................ 9
ADC Circuit Information .............................................................. 10
Overview ..................................................................................... 10
Filter, Data Rate, and Settling Time ......................................... 10
Gain .............................................................................................. 10
Power-Down/Reset (
PDRST
) ................................................... 10
Analog Input Channel ............................................................... 10
Bipolar Configuration ................................................................ 10
Data Output Coding .................................................................. 11
Reference ..................................................................................... 11
Digital Interface .......................................................................... 11
Grounding and Layout .............................................................. 12
Applications Information .............................................................. 13
Temperature System ................................................................... 13
Signal Conditioning Circuit ...................................................... 13
Outline Dimensions ....................................................................... 14
Ordering Guide .......................................................................... 14
REVISION HISTORY
6/15—Rev. A to Rev. B
Changed Pin 10, NC to Pin 10, GND ......................... Throughout
Changes to Figure 5 and Table 5 ..................................................... 7
Changes to Figure 14 ...................................................................... 13
Changes to Figure 15 ...................................................................... 14
Updated Outline Dimensions ....................................................... 14
9/11—Rev. 0 to Rev. A
Changes to Digital Interface Section ............................................ 11
Updated Outline Dimensions ....................................................... 14
Changes to Ordering Guide .......................................................... 14
10/09—Revision 0: Initial Version

AD7170BCPZ-500RL7

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
Analog to Digital Converters - ADC 1CH L/POWER 12-BIT SD GAIN 128 IC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet