EE-SPX402-W2A Datasheet EE-SPX402-W2A, EE-SPX304-W2A, EE-SPX306-W2A | P1-P3

CSM_EE-SPX-W_DS_E_4_2

Slot-type Photomicrosensor with Cable

EE-SPX-W

Photomicrosensor with built-in

amplifier and attached cable reduces

external light interference.

• Light modulation effectively reduces external light interference.

• Wide operation voltage range: 5 to 24 VDC

• Easy operation monitoring with bright light indicator.

Be sure to read Safety Precautions on

page 3.

For the most recent information on models that have been certified for

safety standards, refer to your OMRON website.

Ordering Information

* These models (EE-SPX305/405-W2A only) are not conformed to CE standards.

Appearance

Sensing

method

Sensing distance

(slot width)

Output

type

Output

configuration

Cable

length

Model

Through-beam

type

NPN

output

Dark-ON

1 m

EE-SPX302-W2A 1M

Light-ON EE-SPX402-W2A 1M

Dark-ON EE-SPX304-W2A 1M

Light-ON EE-SPX404-W2A 1M

Dark-ON EE-SPX306-W2A 1M

Light-ON EE-SPX406-W2A 1M

Dark-ON EE-SPX305-W2A 1M*

Light-ON EE-SPX405-W2A 1M*

Infrared li

3.6 mm

5 mm

EE-SPX-W

Ratings and Specifications

I/O Circuit Diagrams

NPN Output

Item

Models EE-SPX302-W2A, EE-SPX402-W2A

EE-SPX304-W2A, EE-SPX404-W2A

EE-SPX306-W2A, EE-SPX406-W2A

EE-SPX305-W2A

EE-SPX405-W2A

Sensing distance 3.6 mm (slot width) 5 mm (slot width)

*1. The indicator is a GaP red LED

(peak wavelength: 700 nm).

*2. The response frequency was measured by

detecting the following rotating disk.

Sensing object Opaque: 1 × 0.5 mm min. Opaque: 2 × 0.8 mm min.

Differential distance 0.05 mm max.

Light source GaAs infrared LED (pulse lighting) with a peak wavelength of 940 nm

Indicator *1 Light indicator (red)

Supply voltage 5 to 24 VDC ±10%, ripple (p-p): 5% max.

Current consumption Average: 15 mA max.; Peak: 50 mA max.

Control output

NPN voltage output:

Load power supply voltage: 5 to 24 VDC

Load current: 80 mA max.

OFF current: 0.5 mA max.

80 mA load current with a residual voltage of 1.0 V max.

10 mA load current with a residual voltage of 0.4 V max.

Response frequency *2 500 Hz min.

Ambient illumination

3,000 lx max. with incandescent light or sunlight on the surface of the

receiver

Ambient temperature

range

Operating: −10 to +55°C

Storage: −25 to +65°C

Ambient humidity range

Operating: 5% to 85%

Storage: 5% to 95%

Vibration resistance

Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 h each in X,

Y, and Z directions

Shock resistance Destruction: 500 m/s

for 3 times each in X, Y, and Z directions

Degree of protection IEC IP50

Connecting method Pre-wired (standard cable length: 1 m)

Weight 18.5 g

Material

Case

Polycarbonate

Holder

2 mm

Disk

EE-SPX305-W2A

EE-SPX302-W2A EE-SPX306-W2A

Model

Output

configuration

Timing charts Output circuit

EE-SPX402-W2A

EE-SPX404-W2A

EE-SPX405-W2A

EE-SPX406-W2A

Light-ON

EE-SPX302-W2A

EE-SPX304-W2A

EE-SPX305-W2A

EE-SPX306-W2A

Dark-ON

Incident

Interrupted

OFF

Operates

Releases

Light indicator

(red)

Output

transistor

Load 1

(relay)

Load 2

5 to 24 VD

Light indicator (red)

1.5 to

3 mA

Load 1

Load 2

Main

circuit

Black

Blue

Brown

∗

* Volta

e out

(

when the sensor is connected to a transistor circuit

)

Incident

Interrupted

OFF

Operates

Releases

Light indicator

(red)

Output

transistor

Load 1

(relay)

Load 2

EE-SPX-W

Engineering Data (Reference Value)

Safety Precautions

Refer to Warranty and Limitations of Liability.

This product is not designed or rated for ensuring

safety of persons either directly or indirectly.

Do not use it for such purposes.

Make sure that this product is used within the rated ambient

environment conditions.

● Wiring

• When extending the cable, use an extension cable with conductors

having a total cross-section area of 0.3 mm

. The total cable length

must be 2 m maximum.

• To use a cable length longer than 2 m, attach a capacitor with a

capacitance of approximately 10 μF to the wires as shown below.

The distance between the terminal and the capacitor must be within

2 m. (Use a capacitor with a dielectric strength that is at least twice

the Sensor's power supply voltage.)

• Make sure the total length of the power cable connected to the

product is less than 10 m even if a capacitor is inserted.

Sensing Position Characteristics

EE-SPX302-W2A

EE-SPX304-W2A

EE-SPX306-W2A

EE-SPX302-W2A

EE-SPX304-W2A

EE-SPX306-W2A

EE-SPX305-W2A EE-SPX305-W2A

0123456

Tr ON

Tr OFF

Dark-ON

Distance d (mm)

0123456

Tr ON

Tr OFF

Dark-ON

Distance d (mm)

Tr O N

Tr OFF

0123456

EE-SPX305-W2A

Dark-ON

Distance d

(

)

Tr ON

Tr OFF

Dark-ON

012345

Distance d

(

)

WARNING Precautions for Correct Use

−

A capacitance of

10 μF min.

5 to 24 VDC

2 m max.

0 V

−

Extension cable

P1-P3 P4-P5

EE-SPX402-W2A

Mfr. #:

Buy EE-SPX402-W2A

Manufacturer:

Omron Automation and Safety

Description:

Optical Switches, Transmissive, Phototransistor Output TRANS LIGHT-ON

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

EE-SPX402-W2A

EE-SPX402-W2A

Products related to this Datasheet