ICS601-02
LOW PHASE NOISE CLOCK MULTIPLIER SYNTHESIZERS
IDT™
LOW PHASE NOISE CLOCK MULTIPLIER 4
ICS601-02 REV E 021009
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the ICS601-02. These ratings, which are
standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these
or any other conditions above those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical
parameters are guaranteed only over the recommended operating temperature range.
DC Electrical Characteristics
Unless stated otherwise, VDD = VDDP = 3.3 V, Ambient Temperature -40 to +85° C
Note 1: Switching occurs nominally at VDD/2.
Item Rating
Supply Voltage, VDD (referenced to ground) 7 V
All Inputs and Outputs (referenced to ground) -0.5 V to VDD+0.5 V
Storage Temperature -65 to +150° C
Soldering Temperature 260° C
Ambient Operating Temperature (industrial) -40 to +85°C
Parameter Symbol Conditions Min. Typ. Max. Units
Operating Voltage VDD 3.0 5.5 V
Output Buffer Voltage VDDP 2.375 VDD V
Input High Voltage V
IH
XI/ICLK pin only, Note 1 (VDD/2)+1 V
Input Low Voltage V
IL
XI/ICLK pin only, Note 1 (VDD/2)-1 V
Input High Voltage V
IH
2V
Input Low Voltage V
IL
0.8 V
Output High Voltage,
CMOS level
V
OH
I
OH
= -4 mA VDD-0.4 V
Output High Voltage V
OH
I
OH
= -12 mA 2.4 V
Output Low Voltage V
OL
I
OL
= 12 mA 0.4 V
Opertating Supply Current IDD No load, 125 MHz 9 20 mA
Short Circuit Current I
OS
Each output ±40 ±60 mA
Input Capacitance C
IN
OE, select pins 5 pF