ADG701/ADG702
Rev. C | Page 5 of 12
ABSOLUTE MAXIMUM RATINGS
T
A
= +25°C, unless otherwise noted.
Table 4.
Parameter Rating
V
DD
to GND −0.3 V to +7 V
Analog and Digital Inputs
1
−0.3 V to V
DD
+ 0.3 V
or 30 mA, whichever
occurs first
Continuous Current, S or D 30 mA
Peak Current, S or D
100 mA, pulsed at 1 ms,
10% duty cycle maximum
Operating Temperature Range
Industrial (B Version) −40°C to +85°C
Storage Temperature Range −65°C to +150°C
Junction Temperature 150°C
MSOP Package, Power Dissipation 315 mW
θ
JA
Thermal Impedance 206°C/W
θ
JC
Thermal Impedance 44°C/W
SOT-23 Package, Power Dissipation 282 mW
θ
JA
Thermal Impedance 229.6°C/W
θ
JC
Thermal Impedance 91.99°C/W
Lead Temperature, Soldering
Vapor Phase (60 sec) 215°C
Infrared (15 sec) 220°C
Pb-free Reflow Soldering
Peak Temperature 260(+0/−5)°C
Time at Peak Temperature 10 sec to 40 sec
ESD 2 kV
1
Overvoltages at IN, S, or D are clamped by internal diodes. Current should be
limited to the maximum ratings given.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating may be applied at any
one time.
Table 5. Truth Table
ADG701 In ADG702 In Switch Condition
0 1 Off
1 0 On
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
