LTO 150
www.vishay.com
Vishay Sfernice
Revision: 15-Feb-18
4
Document Number: 50071
For technical questions, contact: sferfixedresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CLIPS
CLIP MOUNTING RECOMMENDATION
To improve the thermal conductivity, all surface of ceramic has to be coated with a thermal silicon grease. If you not use our
clipped or screwed clip, it is recommended that a mounting force of 60 N to 110 N be applied to the center of the molding case
of the component. Tightening torque 2 Nm when mounting screwed clip MAX08NG on heatsink.
ACCRFLTO150CL (MAX03HNG) ACCRFLTO150VS (MAX08NG)
ORDERING INFORMATION
LTO 150 F 2.7 k ± 1 % xxx TU30 e3
MODEL STYLE CONNECTIONS RESISTANCE VALUE TOLERANCE
± 1 %
± 2 %
± 5 %
± 10 %
CUSTOM DESIGN
Optional
on request:
special TCR,
shape etc.
PACKAGING LEAD (Pb)-FREE
GLOBAL PART NUMBER INFORMATION
GLOBAL
MODEL
SIZE LEADS OHMIC VALUE TOLERANCE PACKAGING LEAD (Pb)-FREE
LTO 150 F = radial leads The first four digits are
significant figures and the
last digit specifies the
number of zeros to follow.
R designates decimal point.
48R70 = 48.7
48701 = 48 700
10002 = 100 000
R0100 = 0.01
R4700 = 0.47
27000 = 2700 = 2.7 k
F = 1 %
G = 2 %
J = 5 %
K = 10 %
T = tube
Tube 30 pieces
E3 = pure tin
CLIP PART NUMBER INFORMATION
REFERENCE PART NUMBER FOR ORDERING
Screwed clip MAX08NG ACCRFLTO150VS
Clipped clip MAX03HNG ACCRFLTO150CL
18
21.5
9.3
0.6
150F270 0 T 3T OL 0JE
