PS2811-1, PS2811-4
R08DS0104EJ0500 Rev.5.00 Page 13 of 14
Jan 23, 2013
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter Symbol Spec. Unit
Climatic test class (IEC 60068-1/DIN EN 60068-1) 55/100/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and
random test)
U
pr
= 1.6 × U
IORM
, P
d
< 5 pC
U
IORM
U
pr
705
1 128
V
peak
V
peak
Test voltage (partial discharge test, procedure b for all devices)
U
pr
= 1.875 × U
IORM
, P
d
< 5 pC
U
pr
1 322 V
peak
Highest permissible overvoltage U
TR
6 000 V
peak
Degree of pollution (DIN EN 60664-1 VDE 0110 Part 1) 2
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303
Part 11))
CTI 175
Material group (DIN EN 60664-1 VDE 0110 Part 1) III a
Storage temperature range T
stg
55 to +150 °C
Operating temperature range T
A
55 to +100 °C
Isolation resistance, minimum value
V
IO
= 500 V dc at T
A
= 25°C
V
IO
= 500 V dc at T
A
MAX. at least 100°C
Ris MIN.
Ris MIN.
10
12
10
11
Ω
Ω
Safety maximum ratings (maximum permissible in case of fault, see
thermal derating curve)
Package temperature
Current (input current I
F
, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
V
IO
= 500 V dc at T
A
= Tsi
Tsi
Isi
Psi
Ris MIN.
150
300
500
10
9
°C
mA
mW
Ω
<R>
<R>
PS2811-1, PS2811-4
R08DS0104EJ0500 Rev.5.00 Page 14 of 14
Jan 23, 2013
Caution GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
All trademarks and registered trademarks are the property of their respective owners.
C - 1
Revision History PS2811-1, PS2811-4 Data Sheet
Description
Rev. Date
Page Summary
1.00 Apr 18, 2000 This data sheet was released as PN10255EJ01V0DS
5.00 Jan 23, 2013 Throughout Renesas format is applied to this data sheet.
p.1 The ordering number and safety standards are revised.
p.3 The explanation in MARKING EXAMPLE is revised.
p.4
ORDERING INFORMATION is modified with the revision of the safety
standards.
p.5
Turn-on Time (t
on
) and Turn-off Time (t
off
) are added to the table in
ELECTRICAL CHARACTERISTICS.
p.6 The graph of LONG TERM CTR DEGRADATION is deleted from those in
TYPICAL CHARACTERISTICS.
p.8 PS2811-1-F4 is deleted from Tape Direction image in TAPING
SPECIFICATIONS.
p.9 PS2811-4-1-F4 is deleted from Tape Direction image in TAPING
SPECIFICATIONS.
p.10 RECOMMENDED MOUNT PAD DIMENSIONS is added.
p.11
The note about temperature condition of the recommended soldering
conditions is deleted.
p.13
The values in SPECIFICATION OF VDE MARKS LICENSE DOCUMENT are
changed as follows.
-- Test voltage is changed from the factor, 1.5, and the value, 1058, to 1.6
and 1128, respectively.

PS2811-1-L-A

Mfr. #:
Manufacturer:
Renesas Electronics
Description:
Transistor Output Optocouplers Hi CTR Opto 1-Ch
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet