OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

DFNA1003AT5

P1-P3
DFN
www.vishay.com
Vishay Dale Thin Film
Revision: 28-May-15
1
Document Number: 60109
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Dual Flat No Lead Molded Precision Thin Film Resistor
Surface Mount Network
The DFN series of precision surface mount resistor networks
feature isolated thin film precision resistors mounted in a
0.8 mm pitch 4 mm x 4 mm dual flat no lead package. The
networks feature 50 % savings in board space over
traditional SOIC packages. They are ideally suited for
applications of unity gain operational amplifiers that require
close TC tracking and tight ratio tolerances over
temperature. Custom configurations are available upon
request.
SCHEMATIC
FEATURES
• 0.8 mm lead pitch
• MSL level 1 per J-STD-020
• Low profile 1 mm seated height
• Small size 4 mm x 4 mm size 50 % board savings
over SOIC packages
• Wide resistance range 100 to 100 k available
• Custom configurations available
• Low TCR ± 25 ppm, TCR tracking to ± 3 ppm
• Ratio tolerances to ± 0.025 %
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL PERFORMANCE
Note
• Consult factory for additional R values and schematics
R
1
8
1
7
2
6
3
5
4
R
1
R
1
R
1
ABSOLUTE TRACKING
TCR 25 3
ABSOLUTE RATIO
TOL. 0.1 0.05
STANDARD RESISTANCE OFFERING (R
1
=)
500 10 k
1 k 20 k
2 k 50 k
4.99 k 100 k
5 k
STANDARD ELECTRICAL SPECIFICATIONS
TEST SPECIFICATIONS CONDITIONS
Material Passivated nichrome -
Pin/Lead Number 8-
Resistance Range 100 to 100 k per resistor -
TCR: Absolute ± 25 ppm/°C -55 °C to +125 °C
TCR: Tracking ± 3 ppm/°C -55 °C to +125 °C
Tolerance: Absolute ± 0.05 % to ± 1.0 % +25 °C
Tolerance: Ratio ± 0.025 % to ± 0.5 % +25 °C
Power Rating: Resistor 100 mW Maximum at +70 °C
Power Rating: Package 100 mW x number of resistors Maximum at +70 °C
Stability: Absolute R ± 0.05 % 2000 h at +70 °C
Stability: Ratio R ± 0.015 % 2000 h at +70 °C
Voltage Coefficient < 0.1 ppm/V -
Working Voltage 100 V max. not to exceed -
Operating Temperature Range -55 °C to +125 °C -
Storage Temperature Range -55 °C to +150 °C -
Noise < -30 dB -
Thermal EMF < 0.08 μV/°C -
Shelf Life Stability: Absolute R ± 0.01 % 1 year at +25 °C
Shelf Life Stability: Ratio R ± 0.002 % 1 year at +25 °C
P x R
DFN
www.vishay.com
Vishay Dale Thin Film
Revision: 28-May-15
2
Document Number: 60109
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Contact factory for package outlines for higher pin count or custom configurations
Notes
(1)
Tolerance available on 1 k and up
(2)
Preferred packaging code
DIMENSIONS AND IMPRINTING in millimeters
Pin 1 Dot
by Marking
DFNA
XXXX
MMYY
Resistance
Value Code
Date
Code
(MMYY)
4.000 ± 0.050
4.000 ± 0.050
85
14
2.700 ± 0.050
Exposed Pad
3.500 ± 0.050
Exposed Pad
2.400
Ref.
0.300 ± 0.050
A
0.000 - 0.050
0.203 Ref.
1234
8
765
Pin 1 Indentification
Chamfer 0.300 x 45°
0.800 BSC
0.400 ± 0.050
A
Max.
Nom.
Min.
0.900
0.850
0.800
(4 mm x 4 mm)
TOP VIEW
BOTTOM VIEW
SIDE VIEW
MECHANICAL SPECIFICATIONS
Resistive Element Passivated nichrome
Substrate Material Ceramic
Body Molded epoxy
Terminals Copper alloy
Plating 100 % matte tin
Marking Resistance to Solvents Per MIL-PRF-914
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: DFNA1002AT1
GLOBAL
MODEL
SCHEMATIC RESISTANCE
TOLERANCE AND
RATIO TOLERANCE
PACKAGING
DFN
(Lead (Pb)-free)
(e3)
A = Isolated equal
value resistors
The first 3 digits are
significant figures and
the last digit specifies
the number of zeros
to follow.
Example:
1002 = 10 k
1003 = 100 k
4991 = 4.99 k
Z = ± 0.05 % abs. ± 0.025 ratio
(1)
A = ± 0.1 % abs. ± 0.05 % ratio
B = ± 0.1 % abs. ± 0.1 % ratio
C = ± 0.25 % abs. ± 0.1 % ratio
D = ± 0.5 % abs. ± 0.1 % ratio
F = ± 1.0 % abs. ± 0.5 % ratio
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
(2)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
TS = 100 min., 1 mult
UF = TUBED
A1002ATF ND 1
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
P1-P3

DFNA1003AT5

Mfr. #:
Buy DFNA1003AT5
Manufacturer:
Vishay
Description:
Resistor Networks & Arrays 100Kohms 0.1%ABS 0.05% RATIO
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet