OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MAL218397102E3

P1-P3P4-P5
183 CPHT
www.vishay.com
Vishay BCcomponents
Revision: 22-Sep-17
1
Document Number: 28434
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Hybrid Conductive Polymer Aluminum Capacitors
SMD (Chip), Low Impedance
Fig. 1
FEATURES
• Long useful life: up to 4000 h at 125 °C
• Very low ESR and high ripple current
• High voltages up to 80 V
• AEC-Q200 qualified products on request
• SMD-version with base plate, lead (Pb)free reflow
solderable
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Automotive electronics
• Industrial and professional applications
• Telecommunications and IT
• Portable and mobile equipment
MARKING
• Rated capacitance (in μF)
• Rated voltage (in V)
• Date code, in accordance with IEC 60062
• Black mark or “-” sign indicating the cathode (the anode is
identified by beveled edges)
• Code indicating group number (83)
PACKAGING
Supplied in blister tape on reel
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case sizes
(L x W x H in mm)
5.0 x 5.0 x 5.8
to 10.0 x 10.0 x 10.5
Rated capacitance range, C
R
10 μF to 330 μF
Tolerance on C
R
± 20 %
Rated voltage range, U
R
25 V to 80 V
Category temperature range -55 °C to +125 °C
Endurance test at 125 °C 4000 h
Useful life at 125 °C 4000 h
Shelf life at 0 V, 125 °C 1000 h
Based on sectional
specification
IEC 60384-25 / CECC 32300
Climatic category IEC 60068 55 / 125 / 56
higher
183 CPHT
125 °C
temperature
182 CPHZ
105 °C
SELECTION CHART FOR C
R
, U
R
, AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm)
C
R
(μF)
U
R
(V)
25 35 50 63 80
10 5.0 x 5.0 x 5.8 6.3 x 6.3 x 5.8 -
22 5.0 x 5.0 x 5.8 6.3 x 6.3 x 5.8 6.3 x 6.3 x 7.7 8.0 x 8.0 x 10.5
33 5.0 x 5.0 x 5.8 6.3 x 6.3 x 7.7 8.0 x 8.0 x 10.5 10.0 x 10.0 x 10.5
47 6.3 x 6.3 x 5.8 10.0 x 10.0 x 10.5
56 6.3 x 6.3 x 5.8 10.0 x 10.0 x 10.5 -
68 6.3 x 6.3 x 7.7 8.0 x 8.0 x 10.5 10.0 x 10.0 x 10.5 -
100 6.3 x 6.3 x 7.7 10.0 x 10.0 x 10.5 - -
120 10.0 x 10.0 x 10.5 - -
150 8.0 x 8.0 x 10.5 - - -
220 8.0 x 8.0 x 10.5 - - - -
270 10.0 x 10.0 x 10.5 - - -
330 10.0 x 10.0 x 10.5 - - - -
183 CPHT
www.vishay.com
Vishay BCcomponents
Revision: 22-Sep-17
2
Document Number: 28434
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 2 - Dimensional outline
Table 1
Table 2
MOUNTING
The capacitors are designed for automatic placement on to
printed-circuit boards.
Optimum dimensions of soldering pads depend amongst
others on soldering method, mounting accuracy, print
layout and / or adjacent components.
For recommended soldering pad dimensions, refer to Fig. 3
and Table 3.
SOLDERING
Soldering conditions are defined by the curve, temperature
versus time, where the temperature is that measured on the
component during processing.
For maximum conditions refer to Fig. 4.
Any temperature versus time curve which does not exceed
the specified maximum curves may be applied.
As a general principle, temperature and duration shall be the
minimum necessary required to ensure good soldering
connections. However, the specified maximum curves
should never be exceeded.
DIMENSIONS in millimeters AND MASS
NOMINAL CASE SIZE
L x W x H
CASE
CODE
L
MAX.
W
MAX.
H
MAX.
Ø D B
MAX.
SL1
MAX.
MASS
(g)
5.0 x 5.0 x 5.8 0506 5.5 5.5 6.1 5.0 0.8 1.4 6.1 0.2
6.3 x 6.3 x 5.8 0606 6.7 6.7 6.1 6.3 0.8 2.2 7.4 0.3
6.3 x 6.3 x 7.7 0608 6.7 6.7 8.0 6.3 0.8 2.2 7.4 0.4
8.0 x 8.0 x 10.5 0810 8.5 8.5 10.8 8.0 1.1 3.1 9.2 0.9
10.0 x 10.0 x 10.5 1010 10.5 10.5 10.8 10.0 1.1 4.5 11.2 1.2
TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES
NOMINAL CASE SIZE
L x W x H
CASE
CODE
PITCH
P
1
TAPE WIDTH
W
TAPE
THICKNESS
T
2
REEL DIAMETER
PACKAGING
QUANTITY
PER REEL
5.0 x 5.0 x 5.8 0506 12 12 6.1 380 1000
6.3 x 6.3 x 5.8 0606 12 16 5.7 380 1000
6.3 x 6.3 x 7.7 0608 12 16 8.0 380 900
8.0 x 8.0 x 10.5 0810 16 24 11.0 380 500
10.0 x 10.0 x 10.5 1010 16 24 11.0 380 500
2-pin:
W
MAX.
S
L
MAX.
B
min. 0.4 / max. 1.0 (2 x)
Negative
polarity
H
MAX.
MAX. 0.3
D
L1
MAX.
VISHAY
39
63V
83 H5
183 CPHT
www.vishay.com
Vishay BCcomponents
Revision: 22-Sep-17
3
Document Number: 28434
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 3 - Recommended soldering pad dimensions
Table 3
SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS
Fig. 4 - Maximum temperature load during reflow soldering
Table 4
Note
• Temperature measuring point on top of the case and on terminals
RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters
NOMINAL CASE SIZE
L x W x H
CASE CODE a b c
5.0 x 5.0 x 5.8 0506 3.0 1.6 1.4
6.3 x 6.3 x 5.8 0606 3.5 1.6 2.1
6.3 x 6.3 x 7.7 0608 3.5 1.6 2.1
8.0 x 8.0 x 10.5 0810 4.2 1.9 2.8
10.0 x 10.0 x 10.5 1010 4.4 1.9 4.3
REFLOW SOLDERING CONDITIONS for MAL2183xxxxxE3
PROFILE FEATURES 25 V 35 V TO 80 V
Maximum time between 150 °C to 180 °C (t
1
) 120 s 120 s
Maximum time above 200 °C (t
2
) 80 s 70 s
Maximum time above 230 °C (t
3
) 50 s 30 s
Peak temperature T
Peak
240 °C 240 °C
Maximum reflow cycles 2 1
aac
b
Time (s)
Peak temperature
180
200
230
(°C)
T
peak
Preheat
t
1
t
2
Temperature of the Surface / Terminal
t
3
P1-P3P4-P5

MAL218397102E3

Mfr. #:
Buy MAL218397102E3
Manufacturer:
Description:
Aluminum Organic Polymer Capacitors 22uF 50V 20% 125C 4000H 6.3x6.3x5.8
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet