OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TC7MBL3253CFT(EL)

P1-P3P4-P6P7-P9P10-P11
TC7MBL3253CFT/FK
2017-02-23
1
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC7MBL3253CFT, TC7MBL3253CFK
Dual 1-of-4 FET Multiplexer/Demultiplexer
The TC7MBL3253C is a Low Voltage/Low Capacitance CMOS
2bit 1-of-4 Multiplexer/Demultiplexer. The low on-resistance of the
switch allows connections to be made with minimal propagation
delay time.
This device consists of two individual four-inputs
multiplexer/demultiplexer with common select input (S1, S0) and
output enable (
OE
). The A input is connected to the B1 to B4
outputs as determined by the combination of both the select input
(S1, S0) and output enable (
OE
). When the output enable (
OE
)
input is held at “H” level, the switches are open regardless of the
state of the select inputs, and a high-impedance state exists
between the switches.
All inputs are equipped with protection circuits against static
discharge.
Features
• Operating voltage: V
CC
= 1.65 to 3.6 V
• On-capacitance: C
I/O
= 13 pF Switch On (typ.) @ V
CC
= 3 V
• On-resistance: R
ON
= 9 Ω (typ.) @ V
CC
= 3 V, V
I/O
= 0 V
• ESD performance: Machine model ≥ ±200 V
Human body model ≥ ±2000 V
• Power-down protection for inputs (
OE
, S1, S0 and I/O)
• Package: TSSOP16, VSSOP16 (US16)
Pin Assignment
(top view)
TC7MBL3253CFT
TC7MBL3253CFK
Weight
TSSOP16
-P-0044-0.65A: 0.06 g (typ.)
VSSOP16-P-0030-0.50: 0.02 g (typ.)
FT (TSSOP16-P-0044-0.65A)
FK (VSSOP16-P-0030-0.50)
(top view)
V
CC
S0
2B4
OE1
1
2
3
4
1B3
S1
1B4
2B3
2B1
2A
11
9
1B2
5
6
7
8
GND
1B1
1A
OE2
Start of commercial production
2008-06
TC7MBL3253CFT/FK
2017-02-23
2
Truth Table
Inputs
Function
OE
S1 S0
L L L A port = B1 port
L L H A port = B2 port
L H L A port = B3 port
L H H A port = B4 port
H X X Disconnect
X: Don’t care
System Diagram
1A
1B3
1B2
2B4
2B3
2B2
2B1
1B4
OE2
OE1
S1
2A
TC7MBL3253CFT/FK
2017-02-23
3
Absolute Maximum Ratings (Note)
Characteristics Symbol Rating Unit
Power supply range V
CC
−0.5 to 4.6 V
Control pin input voltage (
OE
, S1, S0) V
IN
-0.5 to 4.6 V
Switch terminal I/O voltage
V
CC
= 0 V or Switch = Off V
S
-0.5 to 4.6
V
Switch = On V
S
-0.5 to V
CC
+0.5
Clamp diode current I
IK
-50
mA
Switch I/O current I
S
50 mA
Power dissipation P
D
180 mW
DC V
CC
/GND current I
CC
/I
GND
±100 mA
Storage temperature T
stg
-65 to 150 °C
Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even
destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Operating Ranges (Note)
Characteristics Symbol Rating Unit
Power supply voltage V
CC
1.65 to 3.6 V
Control pin input voltage (
OE
, S1, S0) V
IN
0 to 3.6 V
Switch terminal I/O voltage
V
CC
= 0 V or Switch = Off V
S
0 to 3.6
V
Switch = On V
S
0 to V
CC
Operating temperature T
opr
-40 to 85 °C
Input rise and fall time dt/dv 0 to 10 ns/V
Note: The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either V
CC
or GND.
P1-P3P4-P6P7-P9P10-P11

TC7MBL3253CFT(EL)

Mfr. #:
Buy TC7MBL3253CFT(EL)
Manufacturer:
Toshiba
Description:
Digital Bus Switch ICs General-purpose bus switch
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet