PJ-080BH

date 05/02/2016
page
1 of 3
cui.com
MODEL: PJ-080BH DESCRIPTION: DC POWER JACK
SPECIFICATIONS
parameter conditions/description min typ max units
rated input voltage 24 Vdc
rated input current 10 A
contact resistance
1
between terminal and mating plug
between terminal in a closed circuit
50
30
mΩ
mΩ
insulation resistance at 500 Vdc 100 MΩ
voltage withstand at 50/60Hz for 1 minute 500 Vac
insertion/withdrawl force 0.3 3 kg
terminal strength any direction for 10 seconds 500 g
operating temperature -25 85 °C
life 5,000 cycles
Notes: 1. When measured at a current of less than 100 mA / 1 kHz
SOLDERABILITY
parameter conditions/description min typ max units
wave soldering dipped in solder pot for 5 ±0.5 seconds at 255 260 265 °C
FEATURES
• 10 A current rating
• shielded
• no internal switch
RoHS
For more information, please visit the product page | For information on related products, view External Power Supplies
cui.com
CUI Inc MODEL: PJ-080BH DESCRIPTION: DC POWER JACK date 05/02/2016 page 2 of 3
MECHANICAL DRAWING
MATERIAL PLATING
terminal 1 brass silver
terminal 2 copper alloy silver
stopper cold rolled steel nickel
shield A cold rolled steel nickel
shield B stainless steel
plastic PA6T
units: mm
TOLERANCE:
X.X ±0.2mm
X.XX ±0.1mm
X.XXX ±0.05mm
MATING PLUG
Rating: 20 Vdc, 7 A
MATING PLUG
Rating: 20 Vdc, 10 A
Schematic
Model Center Pin
PJ-080BH ø2.5 mm
Jack Insertion Depth: 11.1mm
For more information, please visit the product page | For information on related products, view External Power Supplies
CUI Inc MODEL: PJ-080BH DESCRIPTION: DC POWER JACK date 05/02/2016 page 3 of 3
CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website.
CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is
assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to
affect its safety or effectiveness.
Headquarters
20050 SW 112th Ave.
Tualatin, OR 97062
800.275.4899
Fax 503.612.2383
cui.com
techsupport@cui.com
rev. description date
1.0 initial release 03/07/2012
1.01 increased voltage rating 05/02/2016
The revision history provided is for informational purposes only and is believed to be accurate.
REVISION HISTORY
For more information, please visit the product page | For information on related products, view External Power Supplies

PJ-080BH

Mfr. #:
Manufacturer:
CUI Inc
Description:
DC Power Connectors 2.5x5.5 HZ TH 1Swtch powerjack w/shieldng
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet