NOTES: (UNLESS OTHERWISE SPECIFIED)
1. ALL DIMENSIONS ARE IN INCHES [mm].
2. DIMENSIONS APPLY AFTER FINISHING.
3. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE, USE
MATERIALS THAT DO NOT CONTAIN REACH SUBSTANCES OF VERY
HIGH CONCERN >1000ppm, AND USE DRC CONFLICT-FREE
SOURCED MATERIALS.
4. SAFETY BREAK ALL SHARP CORNERS AND EDGES .02 MAXIMUM,
SHEET 1 OF 1
LDCFDLT_A
SCALE: 2:1
TITLE:
SIZE
DWG. NO.
REV
DO NOT SCALE DRAWING
ANGLES:
1
TOLERANCES:
.020 [0.50]-.200 [5.00]=
.008 [0.20]
.200 [5.00]-1.200 [30.00]=
.016 [0.40]
1.20 [30.0]-4.75 [120.0]=
.024 [0.60]
4.75 [120.0]-12.40 [315.0]=
.040 [1.0]
DRAWN:
ENGR:
DT:
DT:
MATERIAL:
FINISH:
PROJECTION:
:
THIS DRAWING CONTAINS PROPRIETARY INFORMATION
THAT IS THE SOLE PROPERTY OF LINX TECHNOLOGIES, AND SHALL BE
TREATED AS SUCH. NO DISCLOSURE OR REPRODUCTION OF THIS
DOCUMENT IS PERMITTED, IN WHOLE OR IN PART, WITHOUT THE
EXPRESS WRITTEN PERMISSION OF LINX TECHNOLOGIES OR ITS
DESIGNATED AGENTS.
159 ORT LANE
MERLIN, OR 97532
D
MMCX MALE CABLE END CRIMP
FOR RG174 CABLE
CONMMCX007
1/13/10
CJ
REVISIONS
REV
DESCRIPTION
DATE
APPV
B
New frame; added heat shrink 1/13/10 CJ
Descripon Material Finish
Body
Pin
Insulaon
Gold
N/A
Gold
PTFE
Crimp Ring GoldBrass
Lock Washer GoldBe Cu
Heat Shrink BlackPolyolefin
Brass
Brass
0.228
[5.80]
0.102
[2.60]
RECOMMENDED CABLE STRIPPING DIMENSIONS
0.091
[2.30]
RG-174 Cable
Ø0.15
[3.8]
0.276
[7.00]
Ø0.031
[0.80]
0.104
[2.65]
0.228
[5.80]
Ø0.016
[0.40]
Ø0.102
[2.60]
0.508
[12.90]
0.177
[4.50]
0.224
[5.70]
0.104
[2.65]
Ø0.093
[2.35]
Ø0.157
[4.00]
SIDE VIEW
PIN
CRIMP RING
CONMMCX007 ASSEMBLY INSTRUCTIONS
Ø0.197
[5.00]
0.787
[20.00]
HEAT SHRINK
1. Strip the cable to the recommended dimensions.
2. Slip heat shrink and crimp ring over stripped cable.
3. Solder the pin to the center conductor.
4. Insert the pin, center conductor and insulator into the
body until the top of the pin is even with the body.
5. Wrap the braid around the tail of the body and crimp the ring with a
0.128” hex crimp tool (or one labeled for use with RG-174 cable).
6. Use heat shrink to cover crimp.
C
Added new title block; Updated instructions 12-JUL-12 BPM
D
Updated body finish from Nickel to Gold; Updated note 3 3-MAY-16 SAH
S.HOGAN
3-MAY-16
