General Description
The MAX4899E/MAX4899AE analog multiplexers com-
bine the low on-capacitance (C
ON
) and low on-resis-
tance (R
ON
) necessary for high-performance switching
applications. These devices are designed for USB 2.0
high-speed applications at 480Mbps. The MAX4899E/
MAX4899AE also handle all the requirements for USB
low- and full-speed signaling.
The MAX4899E is a dual 3:1 multiplexer whereas the
MAX4899AE is a dual 4:1 multiplexer. The MAX4899E/
MAX4899AE feature two digital inputs, C
0
and C
1
, to con-
trol the analog signal path. Typical applications include
switching a USB connector between USB and other oper-
ations such as serial communications, audio, and video.
An enable input (EN) is provided to disable all channels
and place the device into a high-impedance (off) state,
as well as reducing power consumption.
The MAX4899E/MAX4899AE operate from a 2.7V to
3.6V power-supply voltage and are protected against
+5.5V shorts to COM
A
- and COM
A
+. In addition,
COM
A
+ and COM
A
- are normally connected to outside
circuitry and feature ±15kV ESD protection. The
MAX4899E/MAX4899AE are available in a 3mm x 3mm,
16-pin TQFN package and operate over the -40°C to
+85°C temperature range.
Applications
Cell Phones
Digital Still Cameras
PDAs
Digital Video Cameras
MPEG-4 Players
Portable GPS
Combination Products
KVM
Features
♦ Single 2.7V to 3.6V Power-Supply Voltage
♦ Low 4Ω (typ) On-Resistance (R
ON
)
♦ -3dB Bandwidth: 425MHz
♦ Fault Tolerant to Meet Full USB 2.0 Specification
♦ COM_ Protected to ±15kV ESD Protection per
Human Body Model (MIL-STD-883; Method 3015)
♦ Low Operating Current (200µA), Ultra-Low
Quiescent Current (3.0µA max) in Standby Mode
♦ Low Threshold Eliminates the Need for
Translators in 1.8V Low Voltage Systems
♦ Tiny 16-Pin, 3mm x 3mm, Lead-Free TQFN Package
MAX4899E/MAX4899AE
USB 2.0 High-Speed, Fault-Tolerant 3:1, 4:1
Multiplexers
________________________________________________________________ Maxim Integrated Products 1
19-0616; Rev 0; 7/06
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
EVALUATION KIT
AVAILABLE
Ordering Information/Selector Guide