®
Accessories
Cassette Style Mating Connectors H11, H15, H15S2, H15S4
BCD20022 Rev. AB, 9-Apr-09 Page 8 of 9 www.power-one.com
Connector retention clips (unlocked)
Connector retention clips (locked)
12050
Extraction Tool for High Current
Contacts
High current plugs and jacks can be disassembled from the
moulding by means of a special extraction tool (H15S2 and
H15S4 connectors). Holding the extraction tool over the center
of the connector's female contact the outer part of the
extraction tool should be fed between the moulding and the
outside of the female contact itself. This releases the spring
clip fixing the contacts, in order to pull the contacts out of their
moulding for replacement. If the operation is performed
correctly, very little force is required. Extreme care should be
taken since incorrect procedure and excessive force could
damage the tool and/or the connector.
This tool is available as an accessory for high-current solder
and high-current screw contacts.
Note: In order to avoid damage, never manipulate high-current
contacts when plugged-in!
Description: Extraction tool
Reference: HZZ00150
Connector Retention Clips V
The retention clip V is an accessory, which guarantees secure
connection even under severe vibration, as for example in
mobile applications. One connector retention system fits to
almost all converters and all of the mentioned connector types.
The following converter series are delivered with pre-punched
holes in the back plate for fast field-mounting of retention clips:
Note: Suitable for H, M, K, S, PSK, PSS, PSL, and T (Q, LPC, P
Series only in combination with Mounting Plate Q [HZZ01215])
Description: Retentionclip (2x)
Reference: HZZ01209
Delivery content: 2 pcs.
Fig. 19
Connector retention clips
Fig. 18
Extraction tool
Connector Retention Brackets CRB
An alternative to the above mentioned retention clip V is the
connector retention bracket. They are attached to the back
plate by one screw each with a torque of 20 to 30 Ncm.
Table 5: Connector Retention Bracket Survey
Connector Item number Delivery
series [Reference] content
H, M, PSL CRB-HKMS 2 brackets
K, PSK [HZZ01216] 2 screws
S, PSS 2 washers
T
Q, P CRB-Q
LPC [HZZ01217]
Fig. 20
Connector retention bracket CRB