G125-MC13405L4-0450L Datasheet G125-MC22605L4-0450L, G125-MC12005L4-0450L, G125-MC45005L4-0450L | P1-P3

G125 Series 1.25mm Pitch High Reliability Connectors

G125 Series 1.25mm Pitch High Reliability ConnectorsG125 Series 1.25mm Pitch High Reliability Connectors

G125 Series 1.25mm Pitch High Reliability Connectors

October 2015

C12505 Issue: 5 Change Note: 12979 Date: 22.10.2015

Prepared by: Mahew Perren

Checked by:

C12505

COMPONENT SPECIFICATION

SECTION TITLE PAGE

1 Description of Connectors and Intended Application 2

2 Ratings 3

Appendix 1 Contact Numbering of Positions 4

1.0 DESCRIPTION OF CO

.0 DESCRIPTION OF CO.0 DESCRIPTION OF CO

.0 DESCRIPTION OF CONNECTOR AND INTENDED

NNECTOR AND INTENDEDNNECTOR AND INTENDED

NNECTOR AND INTENDED

APPLICATION

APPLICATIONAPPLICATION

APPLICATION.

The G125 series of connectors is comprised of barrel crimp contacts and crimp housings; available in Male and Female

applications as well as Vertical PC-Tail and Surface Mount Connectors on a 1.25mm pitch.

The G125 Crimp variants are fully shrouded, unsealed connectors with replaceable contacts. They are designed for

interconnecting cable-to-cable and cable-to-board. The housings have a low proﬁle potting wall to allow back potting for

additional strain relief and improved sealing where required. All pre-made cables are supplied back-potted for customer

convenience. Male variants can be equipped with locking latches for secure interconnection with easy to release features.

The G125 Vertical variants are fully shrouded, unsealed connectors for interconnecting cable-to-board and board-to-board. The

Male connectors can be equipped with locking latches for secure interconnection with easy to release features. Latches can

be speciﬁed with through board locking features or surface mount pads for additional security.

All contacts are gold plated all over for high performance and long service life, the contact plating is hard acid gold of 98%

purity.

The G125 series range covers 06, 10, 12, 16, 20, 26, 34 & 50 total number of contacts currently in a dual row conﬁguration,

suitable for various cable-to-cable, cable-to-board and board-to-board applications. Connector housings are polarised to

prevent mis-matching and have contact position one indicated on the outside of the housings.

2. RATINGS.

2. RATINGS.2. RATINGS.

2. RATINGS.

2.1 MATERIALS

2.1 MATERIALS2.1 MATERIALS

2.1 MATERIALS

All materials are listed on individual drawings.

All Female Contacts ..................................................................................................................... Beryllium Copper

Male PC-tail contacts ................................................................................................................... Phosphor Bronze

Male Crimp Contacts .................................................................................................................... Brass

Housing ………………………………………………………………………………………………….………............... 30% Glass Filled Thermoplastic

Housing Flame Retardant rating ................................................................................................. UL 94 V-0

Latches ............................................................................................................................ Copper Nickel Tin alloy

Potting Compund ………………………………………………………………………………………………………… Stycast 2651 MM with catalyst 9

2.2

2.22.2

2.2

ELECTRICAL CHARACTER

ELECTRICAL CHARACTERELECTRICAL CHARACTER

ELECTRICAL CHARACTERISTICS

ISTICSISTICS

ISTICS

EIA

EIAEIA

EIA-

-364

364364

364-

-70A : 1998

70A : 1998 70A : 1998

70A : 1998 -

Current – per individual contact 25°C ambient temperature .................................................... 2.8A max

(When only one contact per connector is electrically loaded)

EIA

EIAEIA

EIA-

-364

364364

364-

-70A : 1998

70A : 1998 70A : 1998

70A : 1998 -

Current – per contact through all contacts at 25°C ambient temperature ............................... 2.0A max

EIA

EIAEIA

EIA-

-364

364364

364-

-20C : 2004

20C : 2004 20C : 2004

20C : 2004 -

Working Voltage (at 1006mbar, sea level) ............................................................... 450V DC or AC peak

EIA

EIAEIA

EIA-

-364

364364

364-

-20C : 2004

20C : 2004 20C : 2004

20C : 2004 -

Voltage Proof (at 1013mbar, sea level) ..................................................................... 600V DC or AC peak

EIA

EIAEIA

EIA-

-364

364364

364-

-20C : 2004

20C : 2004 20C : 2004

20C : 2004 -

Working Voltage (at 44mbar, 21,336m (70,000ft)) .................................................. 250V DC or AC peak

EIA

EIAEIA

EIA-

-364

364364

364-

-20C : 2004

20C : 2004 20C : 2004

20C : 2004 -

Voltage Proof (at 44mbar, 21,336m (70,000ft)) ...................................................... 350V DC or AC peak

EIA

EIAEIA

EIA-

-364

364364

364-

-06C : 2006

06C : 2006 06C : 2006

06C : 2006 -

Contact Resistance (initial) ......................................................................................... 20mΩ max

EIA

EIAEIA

EIA-

-364

364364

364-

-06C : 2006

06C : 2006 06C : 2006

06C : 2006 -

Contact Resistance (after conditioning) .................................................................................. 25mΩ max

EIA

EIAEIA

EIA-

-364

364364

364-

-21C : 2000

21C : 2000 21C : 2000

21C : 2000 -

Insulation Resistance (initial) .............................................................................. 10GΩ min at 500V DC

EIA

EIAEIA

EIA-

-364

364364

364-

-21C : 2000

21C : 2000 21C : 2000

21C : 2000 -

Insulation Resistance (after conditioning) ….........…………………………................ >1GΩ min at 500V DC

Creepage Distance (contact-to-contact) ............

....................................................................................................... 0.15mm min

Clearance Distance (contact-to-contact) ................................................................................................................... 0.15mm min

C12505 Issue: 5 Change Note: 12979 Date: 22.10.2015

C12505

COMPONENT SPECIFICATION

2. RATINGS (

2. RATINGS (2. RATINGS (

2. RATINGS (continued).

continued). continued).

continued).

2.3 ENVIRONMENTAL CHARACTERISTICS

2.3 ENVIRONMENTAL CHARACTERISTICS2.3 ENVIRONMENTAL CHARACTERISTICS

2.3 ENVIRONMENTAL CHARACTERISTICS

Environmental Classiﬁcation ........................................................65/150/56 days at 93% RH

EIA

EIAEIA

EIA-

-364

364364

364-

-32C : 2000

32C : 2000 32C : 2000

32C : 2000 -

Temperature Range .................................Test Condition IV, Dwell 30mins, 5 cycles -65°C to +150°C

EIA

EIAEIA

EIA-

-364

364364

364-

-28D : 1999

28D : 1999 28D : 1999

28D : 1999 - Vibration Severity ◊..................................Test Condition IV: 10Hz to 2000Hz,1.5mm, 198 mm/s² (20G)

Duration = 2 Hours

EIA

EIAEIA

EIA-

-364

364364

364-

-26B : 1999

26B : 1999 26B : 1999

26B : 1999 -

Salt Mist .......................................................................Test Condition B, 48 hours continuous exposure

EIA

EIAEIA

EIA-

-364

364364

364-

-27B : 1996

27B : 1996 27B : 1996

27B : 1996 -

Shock Severity ◊...................................

......................................................................

...................................Test Condition E: 981 mm/s² (100G) for 6ms in Z AXIS,

490 mm/s² (50G) for 11m/s in X&Y axis.

Bump Severity ◊............................................................................390 mm/s² (40G), 4000 ±10 Bumps

EIA

EIAEIA

EIA-

-364

364364

364-

-01A : 2000

01A : 2000 01A : 2000

01A : 2000 -

Acceleration Severity ..............................490m/s² (50g)

◊

◊ ◊

◊

latches fully utilized

latches fully utilizedlatches fully utilized

latches fully utilized

2.4 MECHANICAL CHARA

2.4 MECHANICAL CHARA2.4 MECHANICAL CHARA

2.4 MECHANICAL CHARACTERISTICS

CTERISTICSCTERISTICS

CTERISTICS

Durability ............................................................................................................................................................. 1000 operations

Durability (Latches) ................................................................................................................................. ........... 100 operations*

Contact Retention in Housing (All Contact types) ..... ....................................................................................... 6N min

Insertion Force (per contact, using mating contact) ......................................................................................... 2.8N max

Withdrawal Force (per contact, using mating contact) .................................................................................... 0.2N min

*By hand or with Z125-926XX00 tools. Minimum added retention of 20N.

2.5 WIRE TERMINATION RANGE

2.5 WIRE TERMINATION RANGE 2.5 WIRE TERMINATION RANGE

2.5 WIRE TERMINATION RANGE -

G125 SERIE

G125 SERIEG125 SERIE

G125 SERIES CRIMP PRODUCTS ONLY

S CRIMP PRODUCTS ONLYS CRIMP PRODUCTS ONLY

S CRIMP PRODUCTS ONLY

Wire Type (recommended) ....................................................... BS 3G 210 type A, MIL-W-16878/6 type ET or NEMA HP3 type ET

Maximum Insulation Diameter ................................................................................................... ......................... Ø0.80mm

Insulation Strip Length.................................................................................................................. ......................... 1.50-1.75mm

2.6 G125 SERIES CRIM

2.6 G125 SERIES CRIM2.6 G125 SERIES CRIM

2.6 G125 SERIES CRIMPING AND ASSEMBLY METHODS

PING AND ASSEMBLY METHODSPING AND ASSEMBLY METHODS

PING AND ASSEMBLY METHODS

For information on Crimping Gecko contacts refer to Tooling Instruction Sheet IS-37 - Hand Crimp Tool Z125-900.

For information regarding the insertion/removal of Gecko contacts refer to Tooling Instruction Sheet IS-38 - Gecko Assembly

Tool Z125-902.

See Harwin video:

http://youtu.be/ErgGEZBwoa4

for a full instruction video.

Recommended Potting compound is Stycast 2651 MM with catalyst 9.

Conductor

Max

Insulation

Dia in mm

Conductor Barrel

Minimum

Pull-Off

Force

Size Stranding Diameter Area

Circular

MIL Area

Hand Crimp

Tool:

Z125-900

Positioner:

Z125-901

Crimp

Height

AWG No. x Ømm mm mm

CMA mm N

26 7 x 0.15 Ø0.533 0.128 253 6

Ø0.80 0.95-1.10

28 7 x 0.13 Ø0.381 0.072 159 5 13

30 7 x 0.10 Ø0.305 0.057 100 5 12

32 7 x 0.08 Ø0.203 0.035 62 5 6

Crimp Tool

Setting No.

C12505

COMPONENT SPECIFICATION

C12505 Issue: 5 Change Note: 12979 Date: 22.10.2015

P1-P3 P4-P4

G125-MC13405L4-0450L

Mfr. #:

Buy G125-MC13405L4-0450L

Manufacturer:

Harwin

Description:

Ribbon Cables / IDC Cables 1.25MM M/L CA 2x17 450MM 26AWG

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

G125-MC13405L4-0450L

G125-MC13405L4-0450L

Products related to this Datasheet