AQ-N
REFERENCE DATA
1. Load current vs. ambient temperature
Use load current within range specified in the figure below.
Tested condition
With external heat sink
1) (1) 10A, 15A, 20A type
Shown with standard heat sink
(AQP801)
(2) Shown with 25A type standard heat sink
(AQP804)
(3) Shown with 40A type standard heat sink
(AQP806)
(4) In the case of the AQP812 slim heat-sink
types, characteristics data are available
for each type. Please refer to (6).
2) If attached to a heat sink, use a heat
conductive compound (Ex. Toshiba silicone
YG6111 or TSK5303) of similar coating to
improve cooling.
Without external heat sink
If the mounting surface is not metallic and a
heat sink is not used, expose the bottom
surface and plate surface to improve heat
dissipation.
(1) 10A type
4
2
6
8
10
12
0
0-20 20 40 60 80 100
Ambient temperature, °C
Load current, A
When using AQP-HS-J10A or a steel
plate of 100×100×t0.8 (mm) or greater
When using as
stand-alone
(2) 15A type (3) 20A type (4) 25A type
10080604020-20 0
5
10
15
20
0
Ambient temperature, °C
Load current, A
When using a steel
plate of 100×100×t1.6
(mm) or greater
When using as stand-alone
When using AQP-HS-J10A or a steel plate
of 150×150×t1.6 (mm) or greater
Ambient temperature, °C
Load current, A
10080604020-20 0
5
10
15
20
25
0
When using as stand-alone
When using a steel plate
of 75×75×t1.6 (mm) or greater
When using AQP-HS-J10A
When using a steel
plate of 100×100×t1.6
(mm) or greater
When using a steel
plate of 150×150×t1.6
(mm) or greater
10080604020-20 0
5
10
15
20
25
30
0
When using a steel
plate of 150×150×t1.6
(mm) or greater
When using a steel
plate of 100×100×t1.6
(mm) or greater
When using as stand-alone
When using
AQP-HS-30/40A
When using
AQP-HS-J10A
Ambient temperature, °C
Load current, A
(5) 40A type (6) Data when mounted on an AQP-HS-SJ20A
slim heat sink
2. Non-repetitive surge current vs. carrying
time
10080604020-20 0
5
10
15
20
25
30
35
40
45
0
When using a steel plate
of 150×150×t1.6 (mm)
or greater
When using a steel plate of
100×100×t1.6 (mm) or greater
When using a steel plate of
75×75×t1.6 (mm) or greater
When using as stand-alone
When using
AQP-HS-J25A
When using
AQP-HS-30/40A
Ambient temperature, °C
Load current, A
0
5
30
15
20
25
10
02040 1008060
40 A type
25 A type
20 A type
15 A type
10 A type
Ambient temperature, °C
Load current, A
0
100
500
400
300
200
110100
No. of cycles at 60 Hz
Non-repetitive surge current, A
10 A type
15A type
20A type
25A type
40A type
3. Input current vs. input voltage
10A, 15A, 20A, 25A, 40A common
2
6
4
8
12
10
14
16
10 155020253530
Input voltage, V
Input current, mA
Without LED
With LED
All Rights Reserved © C
OPYRIGHT Panasonic Electric Works Co., Ltd.