ADCMP670
Rev. A | Page 6 of 16
ABSOLUTE MAXIMUM RATINGS
Table 5.
Parameter Range
V
DD
−0.3 V to +6 V
+INA, −INB −0.3 V to +6 V
OUTA, OUTB −0.3 V to +6 V
Output Short Circuit Duration
1
Indefinite
Input Current −10 mA
Operating Temperature Range −40°C to +125°C
Storage Temperature Range −65°C to +150°C
Lead Temperature
Soldering (10 sec) 300°C
Vapor Phase (60 sec) 215°C
Infrared (15 sec) 220°C
1
When the output is shorted indefinitely, the use of a heat sink may be required to
keep the junction temperature within the absolute maximum ratings.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θ
JA
is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 6. Thermal Resistance
Package Type θ
JA
Unit
6-Lead TSOT 200 °C/W
ESD CAUTION