NML Series
Isolated 2W Single Output DC/DC Converters
KDC_NML.E02 Page 5 of 5
www.murata-ps.com/support
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice. © 2012 Murata Power Solutions, Inc.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
This product is subject to the following operating requirements
and the
Life and Safety Critical Application Sales Policy:
Refer to:
http://www.murata-ps.com/requirements/
PACKAGE SPECIFICATIONS
MECHANICAL DIMENSIONS
PIN CONNECTIONS - 4 PIN SIP
Pin Function
1-VIN
2+VIN
3-VOUT
4+VOUT
TUBE OUTLINE DIMENSIONS
RECOMMENDED FOOTPRINT DETAILS
0.55
(14.00)
0.295
(7.50)
0.394
(10.00)
0.181 (4.60)
0.142 (3.60)
0.0118 (0.30)
0.0079 (0.20)
0.022 (0.50)
0.018 (0.45)
0.133 (3.38)
0.3
(7.62)
0.049
(1.25)
0.022 (0.50)
0.018 (0.45)
XYYWWi
NML0505S
All dimensions in inches ±0.01 (mm ±0.25mm). All pins on a 0.1 (2.54)
pitch and within ±0.01 (0.25) of true position.
Weight: 2.0g
SIP Package
2.54
(0.1)
2.54
(0.1)
1.15 (0.0453)
1.00 (0.0394)
Ø
0.1 (0.00394)
4 HOLES
Tube Quantity : 35
Unless otherwise stated all dimensions in inches (mm) ±0.5mm.
Unless otherwise stated all dimensions in inches (mm) ±0.5mm.
Tube length : 20.47 (520mm ±2mm).
RoHS COMPLIANCE INFORMATION
This series is compatible with RoHS soldering
systems with a peak wave solder temperature
of 300oC for 10 seconds. The pin termination
finish on this product series is Tin Plate, Hot
Dipped over Matte Tin with Nickel Preplate.
The series is backward compatible with Sn/Pb
soldering systems.
For further information, please visit www.murata-ps.com/rohs
