CUSTOMER DRAWING
Raychem Molded Parts
305 Constitution Drive,
Menlo Park, CA 94025
TITLE:
CABLE BREAKOUT BOOT,
THREE ENTRY MODIFICATIONS
Unless otherwise specified dimensions are in inches.
[Metric dimensions are shown in brackets
DOCUMENT NO.:
TXXX-XXXFR-XX
REV:
D
Tyco Electronics reserves the right to amend this drawing at any time.
Users should evaluate the suitability of the product for their
application.
SCALE:
None
DATE:
October 6, 2008
REVISED BY:
U. Nguyen
CAGE CODE:
06090
Org. Date
:
5/7/07
FILE :
TXXX-XXXFR-XX.doc
SIZE
A
SHEET:
1 of 1
© 2007-2008 Tyco Electronics Corporation. All rights reserved
If this document is printed it becomes uncontrolled. Check for the latest revision.
CABLE BREAKOUT BOOTS, THREE ENTRY
MODIFICATIONS
Table of Dimensions, inch (mm):
BODY ID
LEG ID
LENGTH RECOVERED
MIN
REC’D. WALL
THICKNESS
REF
PART NUMBER
(SEE NOTE*)
EXP.
(A), MIN
REC’D.
(B), MAX
EXP.
(C), MIN
REC’D.
(D), MAX
(E), BODY
(F), LEG
(W)
T42-100FR-01 1.70 (43) 0.90 (23) 0.95 (24) 0.30 (8) 2.3 (58) 1.2 (30) 0.12 (3.0)
T42-100FR-02 1.70 (43) 0.90 (23) 0.95 (24) 0.30 (8) 1.2 (30) 1.2 (30) 0.12 (3.0)
T42-100FR-G02 1.70 (43) 0.90 (23) 0.95 (24) 0.30 (8) 1.2 (30) 1.2 (30) 0.12 (3.0)
T42-100FR/
ROUND-BASE
2.10 (53) 0.90 (23) 0.82 (21) 0.30 (8) 2.3 (58) 1.2 (30) 0.12 (3.0)
Note*: Add “NA” to the end of Part Number if no adhesive is required
Material: Heat shrinkable boot material in accordance with –3 polyolefin
Factory applied sealant
: Factory applied hot melt adhesive is standard.
