https://www.phoenixcontact.com/us/products/2900362
10/23/2014Page2/5
Solid-state relay module-PLC-PT-EIK 1-SVN 24M-2900362
Technical data
Ambient conditions
Ambient temperature (storage/transport) -40 °C ... 85 °C
Degree of protection IP20
Input data
Designation Device supply
Nominal input voltage U
N
24 V DC ±20 %
Input voltage range in reference to U
N
0.8 ... 1.1
Typical input current at U
N
approx. 14 mA
Max. current consumption approx. 70 mA (at 50 mA output current)
Operating voltage display Green LED
Type of protection Protection against polarity reversal
Surge protection
Protective circuit/component Polarity protection diode
Suppressor diode
Designation Control circuit
Nominal input voltage U
N
8.2 V DC ±10 %
Type of protection Surge protection
Protective circuit/component Suppressor diode
Non-load voltage 8.2 V DC ±10 %
Switching point ≥ 2.1 mA (In conductive state)
≤ 1.2 mA (In blocking state)
6.3 mA ... 10 mA (in the event of a short-circuit)
0 mA ... 0.35 mA (In the event of a wire break)
Switching hysteresis approx. 0.2 mA
Internal resistance approx. 1000 Ω
Cable length < 30 m
Output data
Designation Signal output
Output voltage range 3 V DC ... 33 V DC
Limiting continuous current 50 mA
Transmission frequency approx. 350 Hz
Voltage drop at max. limiting continuous current < 1.5 V
Status display Green LED
Indication Red LED
Type of protection Surge protection
Protective circuit/component Suppressor diode
Designation Alarm output