OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

PWR1310AC

P1-P3P4-P4
FEATURES
ROHS COMPLIANT
HIGH ISOLATION - 4000V RATING
8000V ISOLATION TEST VOLTAGE
BARRIER 100% PRODUCTION TESTED
LOW BARRIER CAPACITANCE - 10pF
LOW LEAKAGE CURRENT - 2μA MAX
24-PIN DIP PACKAGE
INTERNAL FILTERING
APPLICATIONS
BIOMEDICAL DATA ACQUISITION
INDUSTRIAL PROCESS CONTROL
ANALYTICAL MEASUREMENTS
GROUND LOOP ELIMINATION
INTRINSIC SAFETY SYSTEMS
PRODUCT OVERVIEW
The PWR13XXC Series offers a broad line of
low-cost, high-isolation voltage, unregulated,
single and dual output DC/DC converters in a
24-pin DIP package. These small converters
offer a 4000V isolation rating in a 1.25" x
0.8" package area.
The dielectric withstand characteristics of
each converter is tested in production to ensure
barrier integrity. During the development of the
PWR13XXC Series extensive testing was done
to verify that subjecting the barrier to as many
as ten barrier tests will not destroy the barrier.
The PWR13XXC Series uses advanced circuit
design and packaging technology to realize
superior reliability and performance. A 220kHz
driven push-pull oscillator is used to ensure
stable frequency and non-saturating operation
of the input stage. This means there are no
high peak voltages or currents like other design
topologies, which can reduce unit reliability.
Reliability is further enhanced by the use of
MOSPOWER transistors. These rugged devices
permit higher frequency operation with less
complicated drive circuitry than is possible with
bipolar power transistors. Reduced parts count
adds to the reliability of the PWR13XXC Series.
The high efficiency of the PWR13XXC Series
means less internal power dissipation. With
less heat to dissipate, the PWR13XXC Series
can operate over a wider ambient temperature
range with no degradation of reliable operation.
The PWR13XXC Series offers the user low
cost without sacrificing reliability. The use of
surface mounted devices and manufacturing
technologies make it possible to offer premium
performance and low cost. Testing of the
PWR13XXC isolation barrier is performed per
the methods set forth by UL544, VDE750, CSA
22.2 and IEC 601-1.
ISO 9001
CER TIFIED
MDC_PWR13xxC.C01 Page 1 of 4
PWR13xxC
1.5 Watts Unregulated DC/DC Converters
www.murata-ps.com
www.murata-ps.com/support
For full details go to
www.murata-ps.com/rohs
NOMINAL RATED RATED REFLECTED
INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT NO LOAD RATED LOAD RIPPLE CURRENT
MODEL (VDC) (VDC) (mA) (mA) (mA) (mAp-p)
PWR1300AC 5 5 300 50 400 30
PWR1301AC 5 12 125 50 400 30
PWR1302AC 5 15 100 50 400 30
PWR1303AC 5 ± 5 ±150 50 400 30
PWR1304AC 5 ±12 ±63 50 400 30
PWR1305AC 5 ±15 ±50 50 400 30
PWR1306AC 12 5 300 30 167 25
PWR1307AC 12 12 125 30 167 25
PWR1308AC 12 15 100 30 167 25
PWR1309AC 12 ± 5 ±150 30 167 25
PWR1310AC 12 ±12 ±63 30 167 25
PWR1311AC 12 ±15 ±50 30 167 25
PWR1312AC 15 5 300 30 133 20
PWR1313AC 15 12 125 30 133 20
PWR1314AC 15 15 100 30 133 20
PWR1315AC 15 ± 5 ±150 30 133 20
PWR1316AC 15 ±12 ±63 30 133 20
PWR1317AC 15 ±15 ±50 30 133 20
INPUT
Voltage Range 4.5 5 5.5 VDC
10.8 12 13.2 VDC
13.5 15 16.5 VDC
ISOLATION
Rated Voltage 4,000 VDC
Test Voltage 60 Hz, 60 Seconds 8,000 Vpk
Resistance 10 GW
Capacitance 10 pF
Leakage Current VISO= 240VAC, 60Hz 1 2 µArms
OUTPUT
Rated Power 1.5 Watts
Voltage Setpoint Accuracy Rated Load, Nominal Vin ±5 %
Ripple & Noise BW = DC to 10MHz 40 mVp-p
BW = 10Hz to 2MHz 10 mVrms
REGULATION
Line Regulation High Line to Low Line 1.5 %/%
Load Regulation See Performance Curves
GENERAL
Efficiency 75 %
Switching Frequency 220 kHz
Package Weight 12 g
MTTF per MIL-HDBK-217, Rev. E Circuit Stress Method
Ground Benign TA
= +25°C 2,000,000 Hr
TA = +85°C 90,000 Hr
Fixed Ground TA
= +35°C 540,000 Hr
Naval Sheltered TA
= +35°C 300,000 Hr
Airborne Uninhabited Fighter TA = +35°C 55,000 Hr
TEMPERATURE
Specification -40 +25 +85 °C
Storage -55 +110 °C
ELECTRICAL SPECIFICATIONS
Specifications typical at T
A
= +25°C, nominal input voltage, rated output current unless otherwise noted.
INPUT CURRENT
COMMON SPECIFICATIONS
Specifications typical at T
A
= +25°C, rated input voltage, rated output current unless otherwise noted.
PARAMETER CONDITIONS MIN TYP MAX UNITS
*LAST TIME BUY: 3/31/2017. CLICK HERE FOR DISCONTINUANCE NOTICES.
MDC_PWR13xxC.C01 Page 2 of 4
PWR13xxC
1.5 Watts Unregulated DC/DC Converters
www.murata-ps.com/support
To Be Discontinued*
To Be Discontinued*
To Be Discontinued*
To Be Discontinued*
MECHANICAL
ABSOLUTE MAXIMUM RATINGS
Output Short-Circuit Duration ..................................................... 5 seconds
Internal Power Dissipation .............................................................. 750mW
Lead Temperature (soldering, 10 seconds max) .............................+300°C
Device Family
PWR indicates DC/DC converter
Model Number
Selected from Table of Electrical Characteristics
Package
RoHS Compliant
PWR 13XX A C
ORDERING INFORMATION
Notes:
All dimensions are in inches (millimeters).
GRID: 0.100 inches (2.54 millimeters)
* Common pins not present on single output models.
PIN PLACEMENT TOLERANCE: ± 0.015"
Marked with: specific model ordered, date code, job code.
MATERIAL: Units are encapsulated in a low thermal resistance
molding compound which has excellent chemical resistance, wide
operating temperature range, and good electrical properties under
high humidity environments. The encapsulant and outer shell of the
unit have UL94V-0 ratings. Lead material is matte tin 100 microinches
min., over nickel, 40-80 microinches.
PIN CONNECTIONS
PIN SINGLE MODELS DUAL MODELS
1 +V
IN
+V
IN
2 +V
IN
+V
IN
11 +V
OUT
+V
OUT
12 +V
OUT
+V
OUT
13 -V
OUT
Common
14 -V
OUT
Common
15 No Pin -V
OUT
23 -V
IN
-V
IN
24 -V
IN
-V
IN
1.270±0.010"
(32.26)
.805±0.010"
(20.45)
.010±0.005"
(0.25)
0.400±0.010"
(10.16)
0.170" MIN
(4.32)
0.100±0.015"
(2.54)
.020±0.002"
(0.51)
121121
1314152324
BOTTOM VIEW
SIDE VIEW
TOP VIEW
0.600"
(15.23)
.1025"
(.267)
The PWR13XXC devices are intended for wave soldering or manual soldering.
They are not intended to be subject to surface mount processes under any circumstances.
The normal wave soldering process can be used with these devices where the device is subjected
to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time
and temperature range, the integrity of the device’s plastic body will not be compromised and internal
temperatures within the converter will not exceed 175°C. Care should be taken to control manual
soldering limits identical to that of wave soldering.
SOLDERING INFORMATION
MDC_PWR13xxC.C01 Page 3 of 4
PWR13xxC
1.5 Watts Unregulated DC/DC Converters
www.murata-ps.com/support
P1-P3P4-P4

PWR1310AC

Mfr. #:
Buy PWR1310AC
Manufacturer:
Description:
Isolated DC/DC Converters 12V+/-12Vout +/-63mA 24PIN DIP 1.5W Unreg
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet