DATASHEET
Power Cords with Locking System
Power Cord with Locking System for Inlet Filters IL 13, IL 13 P, IL 19
Locking system for standardized IEC C14/C20
inlet filter
No accidental disconnection
Rated current up to 10 A (C13 plug), up to 15 A
(C13P plug), and up to 16 A (C19 plug)
Fits any Schaffner IEC C14/C20 inlet filter
Retrofit for any IEC C14/C20 inlet
Various power line plugs for international
usage
Technical specifications IL 13/IL 13 P
Maximum continuous operating voltage 250 VAC, 50/60 Hz
Rated currents 10 A for C13 plug, 15 A for C13P plug
High potential test voltage P–> PE 2000 VAC (1 min 50 Hz)
P –> N 2000 VAC (1 min 50 Hz)
Protection category IP 20 according IEC 60529
Temperature range (operation and storage) -25°C to +70°C
Connector (load side) IEC C13 according to IEC/EN 60320-2-2 with IEC
Lock UL 498, CSA C22.2 no. 42 (for cold conditions)
pin temperature 70°C, 10 A, Protection Class I
Connector (line side) IEC C14 according to IEC/EN 60320-2-2; EU Schuko
plug CEE7/VII; UK plug BS 1363; US NEMA 5-15
plug standard or hospital grade (UL 817); CH plug
SEV 1011; JP plug JIS 8303 Other plugs on request
Flammability corresponding to Plugs: UL 94 V-2 or better; Cable: IEC 60332-1 Cat.
F2
Technical specifications IL 19
Maximum continuous operating voltage 250 VAC, 50/60 Hz
Rated currents 16 A (IEC)
Operating frequency 50 to 400 Hz
High potential test voltage P–> PE 2000 VAC (1 min 50 Hz)
P –> N 2000 VAC (1 min 50 Hz)
Protection category IP 20 according IEC 60529
Temperature range (operation and storage) -25°C to +70°C
Cable
2 m; 3 x 1.50 mm
2
; H05 VV-5; 6 ft; 3 x AWG14 SJT;
black; other lengths or colors on request
Connector (load side) IEC C19 according to IEC/EN 60320-2-2 with IEC
lock, UL 498, CSA C22.2 no. 42 (for cold conditions)
pin temperature 70°C, 16 A, Protection Class I
Connector (line side) C20 according to IEC/EN 60320-2-2; EU Schuko
plug CEE7/VII angled; UK plug BS 1363 angled; US
plug NEMA 5-15 straight; other plugs on request
Flammability corresponding to Plugs: UL 94 V-2 or better; Cable: IEC 60332-1 Cat.
F2
Approvals
The locking system has a tensile force of typical 200N.
It is recommended to use it with flange mount filters.
For details refer to our Application Note "Using IEC
Lock Power Cords with IEC Inlets and Filters"
Schaffner power cords with IEC lock guard against
accidental disconnection of all electrical appliances
with an IEC inlet. No exchange or modification of the
IEC inlet or IEC inlet filter system is needed. Easy
retrofit for all electronic equipments and devices.
Features and benefits
Power cord with locking system for IEC inlets
Protection class I (IL 13, IL 13 P)
Suitable for use with any C14 IEC inlet (IL 13, IL 13 P)
and C20 IEC inlet (IL 19)
Fits the complete Schaffner IEC inlet filter program
with C14 IEC inlet and C20 IEC inlet (IL 19)
Max. pin temperature 70°C
Typical applications
Data centers
Industrial equipment
Medical devices
In-vitro diagnostic devices
Broadcasting stations
Mobile applications