Output Buffer/Driver
The SN74ALVCH16244 buffer/driver buffers the
MAX1448’s digital output, which produces straight offset
binary data. The buffer is able to drive capacitive loads,
which may be present at the logic analyzer connection,
without compromising the digital output signal. The out-
puts of the buffer are connected to a 40-pin header (J1)
located on the right side of the EV kit where the user can
connect a logic analyzer or data-acquisition system.
Evaluates: MAX1444/MAX1446/MAX1448/MAX1449
MAX1448 Evaluation Kit
_______________________________________________________________________________________ 5
Figure 2. MAX1448EV Kit Component Placement Guide—
Component Side
Figure 3. MAX1448EV Kit PC Board Layout—Component Side
Figure 4. MAX1448EV Kit PC Board Layout—Solder Side Figure 5. MAX1448EV Kit Component Placement Guide—
Solder Side