35835

Description

The MENDA Blow Vac is a compact, dual function unit

which is totally made up of ESD Safe housing parts

and accessories. It is designed for precise removal

and collection of dry dust particles and debris from

equipment that is sensitive to electrostatic discharge

(ESD). Dissipative thermoplastic rubber stretch hose

with a steel conductive spring wire to remove electrostatic

charges via the dissipative housing and ground wire

The Blow Vac has been specially made with a

dissipative housing and attachments/accessories. All

are groundable per S20.20 <1 x 10

9

Static Dissipative.

Inspection

Remove the Blow Vac from the shipping carton and

inspect for damage.

Items included with 120V model 35840 & 35841

• 1Dissipativestretchhose–Extendsover4'or

130cm

TB-4013 December 2012 Page 1 of 3

Blow Vac Vacuum

Operation and Maintenance

TECHNICAL BULLETIN TB-4013

Items included with 230V model 35842 & 35843

• 1Dissipativestretchhose–Extendsover4'or

130cm

• 1SoftDissipativeRubberNozzle

• 1HardDissipativeCreviceNozzle

• 1LowChargingCarryingStrap

• 35837ReplacementHEPAMicromotorfilter

• 35838ReplacementMicromotorfilter

• 35839ReplacementFilterbags,Setof10

Operation

1. Slide one end of the dissipative stretch hose into

suction opening Airflow inlet (vacuum) or Airflow

Outlet (blower).

2. Pressthedesirednozzleontothehoseend.

3. Install any of the other appropriate attachments

to the other end of the hose. The Two Part Blow

rear power inlet Blow Vac. Plug the 3-pin/blade

power plug into an electrical outlet that is properly

grounded in accordance with all local codes and

ordinances. Start Blow Vac by pressing the power

switch to “ON” position.

3651WalnutAvenue,Chino,CA91710

Phone:(909)627-2453•WebSite:MendaTools.com

the Blow Vac is fitted with a special double-layer

paper filter bag, combined with an electro-static

charged micro filter. If there is substantial loss of

suction and/or blow pressure, follow the below steps:

1. Switch-Off appliance and disconnect plug from

electrical outlet.

2. Verifythenozzleorhosehavenotbecome

blocked.

3. LiftthemetallockonthebottomoftheBlowVac

3651WalnutAvenue,Chino,CA91710

Phone:(909)627-2453•WebSite:MendaTools.com

5. Replace the micromotorfilter (35838) after

approximate 5 times of changing the filterbag

(35839).

Safety Warning

• The Blow Vac is designed for indoor use and should

be stored in a dry place.

• It is NOT designed to collect liquids, or health

endangered dust such as asbestos.

• Unplug the Blow Vac when it is not in use.

• Never use the appliance without the paper filterbag

Limited Warranty

Menda expressly warrants that for a period of one (1) year from the date of purchase, Menda Blow Vacs will be free of defects in material

(parts) and workmanship (labor). Within the warranty period, the product will be tested, repaired, or replaced at Menda’s option, free

of charge. Call our Customer Service Department at

instructions and address. Include a copy of your original packing slip, invoice, or other proof of purchase date. Any unit under warranty

should be shipped prepaid to the Menda factory. Warranty repairs will take approximately two weeks.

If your unit is out of warranty, call Customer Service at

Limit of Liability

In no event will Menda or any seller be responsible or liable for any injury, loss or damage, direct or consequential, arising out of the use

of or the inability to use the product. Before using, users shall determine the suitability of the product for their intended use, and users

assume all risk and liability whatsoever in connection therewith.

3651WalnutAvenue,Chino,CA91710

Phone:(909)627-2453•WebSite:MendaTools.com

TB-4013 Page 3 of 3

Specifications

Speed:   Option1)Simplebleedingvalve–35840

   Option2)Steplesselectronicregulator–Adjustable35841

Filter Bag:  Advanced5-StageFilterSystem

Replace filterbag approximately 5 times before having to change micromotorfilter.

    HEPA(Pre-Moto)micromotorfilter

    1.2LiterMultilayerFilterBag

Hose: Dissipative thermoplastic rubber stretch hose

Nozzle:   Dissipativesoftrubbersnorkelnozzle

Tools: Dissipative hard crevice tool