Description
The MENDA Blow Vac is a compact, dual function unit
which is totally made up of ESD Safe housing parts
and accessories. It is designed for precise removal
and collection of dry dust particles and debris from
equipment that is sensitive to electrostatic discharge
(ESD). Dissipative thermoplastic rubber stretch hose
with a steel conductive spring wire to remove electrostatic
charges via the dissipative housing and ground wire
plugged into a three-wire AC electrical outlet.
The Blow Vac can also be converted in seconds into a
powerful blower for dust removal in areas otherwise not
accessible. You simply need to attach the optional two
part blow assembly attachment, MENDA Part Number
35836.
The Blow Vac has been specially made with a
dissipative housing and attachments/accessories. All
are groundable per S20.20 <1 x 10
9
Static Dissipative.
Inspection
Remove the Blow Vac from the shipping carton and
inspect for damage.
Items included with 120V model 35840 & 35841
• 1Dissipativestretchhose–Extendsover4'or
130cm
• 1SoftDissipativeRubberNozzle
• 1HardDissipativeCreviceNozzle
• 1LowChargingCarryingStrap
• 1Detachable13Amp8'PowerCord
• 5Stagefiltrationsysteminstalled(Includes35838
Micromotorfilter with 35339 filterbag)
TB-4013 December 2012 Page 1 of 3
Blow Vac Vacuum
Operation and Maintenance
TECHNICAL BULLETIN TB-4013
Items included with 230V model 35842 & 35843
• 1Dissipativestretchhose–Extendsover4'or
130cm
• 1SoftDissipativeRubberNozzle
• 1HardDissipativeCreviceNozzle
• 1LowChargingCarryingStrap
• 5Stagefiltrationsysteminstalled(Includes35838
Micromotorfilter with 35339 filterbag)
Optional Accessories
• 35834ReplacementDissipativeStretchHose
• 35835MiniAttachmentSet
• 35836Two-PartBlowAssemblyAttachment
• 35837ReplacementHEPAMicromotorfilter
• 35838ReplacementMicromotorfilter
• 35839ReplacementFilterbags,Setof10
Operation
1. Slide one end of the dissipative stretch hose into
suction opening Airflow inlet (vacuum) or Airflow
Outlet (blower).
2. Pressthedesirednozzleontothehoseend.
3. Install any of the other appropriate attachments
to the other end of the hose. The Two Part Blow
Assembly attachment (35836) is recommended for
use if the Blow Vac will be used to blow debris.
4. Place the rocker switch in off position. For the
adjustable airflow unit further place the knob
electronic control onto the Medium power setting.
5. Plug appliance coupling end of the power cord into
rear power inlet Blow Vac. Plug the 3-pin/blade
power plug into an electrical outlet that is properly
grounded in accordance with all local codes and
ordinances. Start Blow Vac by pressing the power
switch to “ON” position.
3651WalnutAvenue,Chino,CA91710
Phone:(909)627-2453•WebSite:MendaTools.com
© 2012 DESCO INDUSTRIES INC.
Employee Owned
Figure 2: Connecting the hose to the airflow outlet.
Figure 1: Menda
®
Blow Vac
35840 35841