www.cherryswitches.com
Page 1 of 2, Last update 2016-01-12, Specifications subject to change without notice.
Digital Vane Sensor
VN1015 Sensors
Magnetically activated digital vane sensor in a rugged,
overmolded plastic housing with three pins or 3-wire flying leads
Description
The VN1015 sensors employ a Hall Effect digital vane sensor and a permanent magnet in two small towers, separated by a 3.4
mm (0.135”) air gap. The output switches when a ferrous target passes between the towers. Typical targets are linear or rotary
vanes using a square saw tooth or an open slot in a solid disk or band.
• Mechanically interchangeable with typical slotted optical switches
• Robust, high speed sensing in dirty/dusty environments
• No mechanical contacts to wear out
• Open collector (sinking or NPN) output can be used with bipolar or
CMOS logic circuits with suitable pull-up resistor
• RoHS compliant
• Door/gate position control
• Exercise equipment
• Printers
Environmental Specifications
Operating Temperature (VN101501,
Operating Temperature (VN101502, VN101504)
Storage Temperature (VN101501, VN101503)
Storage Temperature (VN101502, VN101504)
Electrical Specifications
Mechanical Specifications
Recommended Vane Parameters
Low carbon material at least 1
should penetrate to a depth < 3.05 mm (0.12") from
*Not commonly stocked; please contact the factory or your distributor