6.42
IDT71016, CMOS Static RAM
1 Meg (64K x 16-bit) Commercial and Industrial Temperature Ranges
3
DC Electrical Characteristics
(1)
(VCC = 5.0V ± 10%, VLC = 0.2V, VHC = VCC0.2V)
Absolute Maximum Ratings
(1)
Capacitance
(TA = +25° C, f = 1.0MHz, SOJ Package)
Recommended DC Operating
Conditions
DC Electrical Characteristics
(VCC = 5.0V ± 10%, Commercial and Industrial Temperature Range)
NOTE:
1. VIL (min.) = –1.5V for pulse width less than tRC/2, once per cycle.
Symbol Parameter Min. Typ. Max. Unit
V
CC
Supply Voltage 4.5 5.0 5.5 V
GND Ground 0 0 0 V
V
IH
Input High Voltage 2.2
____
V
DD
+0.5 V
V
IL
Input Low Voltage -0.5
____
0.8 V
NOTE:
1. This parameter is guaranteed by device characterization, but not production
tested.
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may
cause permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in the
operational sections of this specification is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect reliability.
2. VTERM must not exceed VCC + 0.5V.
V
(2 )
Terminal Voltage with
Respect to GND
-0.5 to +7.0 V
T
Operating Temperature 0 to +70
o
C
T
Temperature
Under Bias
-55 to +125
o
C
T
Storage
Temperature
-55 to +125
o
C
P
Power Dissipation 1.25 W
I
DC Output Current 50 mA
3210 tbl 03
|I
| Input Leakage Current V
= Max., V
= GND to V
___
5µA
|I
| Output Leakage Current V
= Max., CS = V
, V
= GND to V
___
5µA
V
Output Low Voltage I
= 8mA, V
= Min.
___
0.4 V
V
Output High Voltage I
= -4mA, V
= Min. 2.4
___
V
NOTES:
1. All values are maximum guaranteed values.
2. fMAX = 1/tRC (all address inputs are cycling at fMAX); f = 0 means no address input lines are changing .
I
Dynamic Operating Current
CS <
V
, Outputs Open, V
= Max., f = f
(2)
210 210 180 180 170 170 mA
I
Standby Power Supply Current (TTL Level)
CS >
V
, Outputs Open, V
= Max., F = f
(2)
60 60 50 50 45 45 mA
I
Standby Power Supply Current (CMOS Level)
CS >
V
, Outputs Open, V
= Max., f = 0
(2)
V
< V
or V
> V
10 10 10 10 10 10 mA
Commercial 0°C to +70°C 0V 5.0V ± 10%
Industrial –40°C to +85°C 0V 5.0V ± 10%
3210 tbl 04
Recommended Operating
Temperature and Supply Voltage