Atmel Security Provisioning Kits [QUICK START GUIDE]
Atmel-8966B-CryptoAuth-Security-Provisioning-Kits-Quick-Start-Guide_122015
Atmel Secure Provisioning Utilities Steps
The following steps briefly describe how to setup the Root and Signer Modules. This is generally a one-time
configuration that takes place during the design phase of a project that uses certificates with ECC
CryptoAuthentication devices.
Step 1 Download the Atmel Secure Provisioning Utilities Setup File
Go to www.atmel.com/eccroot-sign and download the setup file below. “X.Y.Z” notes the file version.
SecureProvisioningUtilitiesSetup_X.Y.Z.exe
Step 2 Install the Atmel Secure Provisioning Utilities Software
There is an option of installing the Root Module Utility and/or the Signer Module Utility.
Step 3 Root Module Utility
1. Insert the Root Module from the AT88CKECCROOT OR AT88CKPROVISION Kit into any available
USB port on the PC.
2. Launch Root Module Utility from the Microsoft Windows Start Menu.
Select All Programs > Atmel Secure Products > Provisioning Kits > Root Module Utility.
3. Follow the “AT88CKECCROOT Root Module Utility User Guide” for detailed instructions.
Select All Programs > Atmel Secure Products > Provisioning Kits > Root Module Utility User’s
Guide.
Step 4 Signer Module Utility
1. Insert the Signer Module from the AT88CKECCSIGNER OR AT88CKPROVISION Kit into any
available USB port on the PC.
2. Insert a configured Root Module from the AT88CKECCROOT OR AT88CKPROVISION Kit into any
available USB port on the PC.
3. Launch Signer Module Utility from the Microsoft Windows Start Menu.
Select All Programs > Atmel Secure Products > Provisioning Kits > Signer Module Utility.
4. Follow the “AT88CKECCSIGNER Signer Module Utility User Guide” for detailed instructions.
Select All Programs > Atmel Secure Products > Provisioning Kits > Signer Module Utility
User’s Guide.
