SPEC NO: DSAL3684 REV NO: V.5B DATE: NOV/23/2012 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203000865
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
iewing
Angle [1]
Min. Typ. 2θ1/2
APBA3010YSGC-GX
Yellow (GaAsP/GaP)
Water Clear
5 8
Super Bright Green (GaP) 5 15
140
°
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength
Yellow
Super Bright Green
590
565
nm I
F=20mA
λD [1] Dominant Wavelength
Yellow
Super Bright Green
588
568
nm I
F=20mA
Δλ1/2 Spectral Line Half-width
Yellow
Super Bright Green
35
30
nm I
F=20mA
C Capacitance
Yellow
Super Bright Green
20
15
pF V
F=0V;f=1MHz
V
F [2] Forward Voltage
Yellow
Super Bright Green
2.1
2.2
2.5
2.5
V I
F=20mA
I
R Reverse Current
Yellow
Super Bright Green
10
10
uA V
R = 5V
Parameter Yellow Super Bright Green Units
Power dissipation 75 62.5 mW
DC Forward Current 30 25 mA
Peak Forward Current [1] 140 140 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
