F03-14-1P Datasheet F03-11, F03-14-1P, F03-12 | P1-P3

CSM_F03-@_DS_E_9_5

Electrodes and Accessories

F03-@

A Wide Variety of Electrodes for Long Lasting

Reliability

• Standard Electrodes are made of stainless steel (SUS 304) and

can be used in applications for purified water.

• SUS316 Electrodes can be used in applications where resistance

to corrosion is required. Titanium and HAS Electrodes can be

used in applications where resistance to acid is required.

• For applications where long electrodes are required, a connection

nut and two Lock Nuts can be used to extend the electrodes 1 m

at a time.

Ordering Information

Material indications are provided on all OMRON electrodes, connection nuts, and Lock Nuts.

Electrodes

Select an electrode appropriate for the type of liquid. Refer to Technical Guide for Level Controllers.

Note: UNS No. (Unified Numbering System No.) is an international metal designation system that specifies a unique number for each material.

Insulated Electrodes

Electrodes are insulated with a plastic sheath to prevent them from

touching each other and to isolate them from debris in the liquid.

Before application, strip back about 10 cm of the sheath at the end to

ensure sufficient conductivity.

Note: Tubing comes in 1-m lengths with a sheath thickness of

0.5 mm.

Connecting Nuts

Note: 1. Spring washers made of the same material are included

with the F03-02 SUS304 and F03-02 SUS316.

Spring washers are not included with the other models.

OMRON does not sell spring washers by themselves.

2. UNS No. (Unified Numbering System No.) is an

international metal designation system that specifies a

unique number for each material.

Refer to Safety Precautions for Electrodes and

Electrode Holders.

Model Material Weight (g) Material indication lines

F03-01 SUS304 ELECTRODE SUS304 Approx. 170 1 line

F03-01 SUS316 ELECTRODE SUS316 2 lines

F03-01 HAS B ELECTRODE N10665 (See note) Approx. 195 3 lines

F03-01 HAS C ELECTRODE N10276 (See note) Approx. 190 4 lines

F03-01 TITANIUM ELECTRODE Titanium Approx. 100 5 lines

Electrodes

Material

indication

lines

Model Sheath

F03-01 SUS304 Vinyl Tubing

F03-01 SUS304 FLUORORESIN Fluororesin Tubing

F03-01 SUS316 Vinyl Tubing

F03-01 SUS316 FLUORORESIN Fluororesin Tubing

Model Material Weight (g) Material

indication

F03-02 SUS304

(See note 1.)

SUS303

(Equivalent to SUS304)

Approx. 12 Blank

F03-02 SUS316

(See note 1.)

SUS316 6

F03-02 HAS B N10665 (See note 2.) Approx. 20 B

F03-02 HAS C N10276 (See note 2.) C

F03-02 TITANIUM Titanium Approx. 6 T

F03-@

Electrode Sets

An Electrode Set consists of an electrode, a connecting nut, and two

Lock Nuts.

Note: HAS and titanium Electrodes do not come in sets.

Lock Nuts

Note: 1. Only SUS304 and SUS316 Lock Nuts come with spring

washers made of the same material. HAS B, HAS C and

TITANIUM don’t come with spring washer.

2. UNS No. (Unified Numbering System No.) is an internation-

al metal designation system that specifies a unique number

for each material.

Electrode Separators

When long electrodes are required, use Separators at each joint (every 1 m) to prevent the Electrodes from touching each other.

Use a 1-pole Separator with BF Electrode Holders. The five-pole model can be used with PS-5S and PS-4S Electrode Holders.

Separators cannot be used with PS-31 Electrode Holders.

Note: The Electrode Separators cannot be used unless the Electrodes are coupled.

Accessories (Order Separately)

Set model Components No. of parts

in an set

Weight

(g)

F03-60 SUS304 F03-01 SUS304

ELECTRODE

1Approx.

190

F03-02 SUS304 1

F03-03 SUS304 2

F03-60 SUS316 F03-01 SUS316

ELECTRODE

F03-02 SUS316 1

F03-03 SUS316 2

Model Material Weight

(g)

Material

indication

F03-03 SUS304

(See note 1.)

SUS303

(Equivalent to SUS304)

Approx.

Blank

F03-03 SUS316

(See note 1.)

SUS316 6

F03-03 HAS B N10665

(See note 2.)

Approx.

F03-03 HAS C N10276

(See note 2.)

F03-03 TITANIUM Titanium Approx.

Model No. of

Electrodes

Dimensions Applicable

Electrode

Holder

Weight (g) Material Operating

Temperature

F03-14 1P 1 BF-@(R) Approx. 15 Ceramic 250°C max.

F03-14 3P 3 PS-3S(R) Approx. 30

F03-14 5P 5 PS-4S(R)

PS-5S(R)

6.5 dia.

28 dia.

Electrode

Holder

Separator

Connecting

nut

Lock Nut

Separator

Lock Nut

Electrode

Spring

washer

Connecting

nut

Note: When using two or more Separators,

be careful with the mounting direction

of the connecting nut screws which

connect electrodes. Avoid the screws

from touching each other.

Three, 7-dia. holes

Five, 7-dia.

holes

Application Model

Protective Cover (for PS-@S and BF-3/-5) F03-11

Mounting Frame (for PS-@S) F03-12

Mounting Frame for Installing in Concrete (for PS-@S(R)) F03-13

Dust-proof Rubber Cap (for PS-31) F03-31

F03-@

Dimensions of Electrodes and Accessories

Note: All units are in millimeters unless otherwise indicated.

■ Safety Precautions

Refer to Safety Precautions for All Level Controllers.

■ Precautions for Correct Use

Cleaning Electrodes

Electrodes are clean when they are dispatched. In the rare occasion

that they become dirty during transit or storage, such as forming an

oil film on the surface, clean them again before using them.

Operating Environment

Use the Electrode within the ambient operating temperature range of

the Holder.

Standard: 1 m

Threaded section: 21±2

5.23 dia.

Threaded section: 21±2

11.5

10 5.5

Electrode

F03-01

Lock Nut

F03-03

SUS304

SUS316

Titanium

F03-03

HAS B

HAS C

11.5

(15) (See note 1.)

10 20

(See note 2.)

11.5

(See note 2.)

Connecting nut

F03-02

SUS304

SUS316

F03-02

HAS B

HAS C

F03-02

Titanium

Note: 1. Dimension when mounting Electrodes.

2. Clamp screws are not provided for HAS B, HAS C, or titanium models. F03-03 Lock Nuts are used to mount Electrodes.

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

P1-P3 P4-P4

F03-14-1P

Mfr. #:

Buy F03-14-1P

Manufacturer:

Omron Automation and Safety

Description:

Controllers SEPARATOR

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

F03-14-1P

F03-14-1P

Products related to this Datasheet