DB3624 Rev 1 7/11
EV-VND5T0100AJ Board connections
9
In case the user wishes to utilize the Current Sense / MultiSense function of the device, it is
necessary to plug a sense resistor in Rsense.
The package includes a through-hole resistor, to be mounted on TP1-TP2 - see Figure 4:
Mounting through-hole sense resistor. Different Rsense values can be adopted based on
user preference.
Another option is soldering an SMD resistor on the dedicated PCB pad, as shown in
Figure 5: Pads for soldering SMD resistor.
Figure 3. No sense resistor
J3 13 IN0
Voltage controlled input
pin with hysteresis,
compatible with 3V and
5 V CMPOS outputs.It
controls OUT0 switch
state.
J3 14 IN1
Voltage controlled input
pin with hysteresis,
compatible with 3V and
5 V CMPOS outputs.It
controls OUT1 switch
state.
J3 15...17 N/A Not connected
J3 18 Multisense 2
Analog current sense
output pin delivers a
current proportional to
the load current.
Table 2. J3 connector: pin functions (continued)
Connector
PIn number Pin name Pin function