P673.H (05/14)
1
pulseelectronics.com
SMT POWER INDUCTORS
Power Beads - PA2607NL and PA2607AHL Series
PA2607
.XXXNL
D/C
CTRY
.008
0.2
Current Rating: Over 90Apk
Inductance Range: 115nH to 300nH
Height: 7.5mm and 7.6mm Max
Footprint: 10.4mm x 7.9mm Max
Halogen Free
Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C
7
NOTES:
1. Inductance measured at 100kHz, 100mVrms.
2. The rated current as listed is either the saturation current or the heating
current depending on which value is lower.
3. The nominal DCR is measured from point a to point b , as shown below
on the mechanical drawing. The standard part (PA2607.XXXNL) has
a DCR tolerance of +/-7%. A tighter DCR tolerance of +/-5% is avail-
able by changing the NL suffix to AHL (i.e. PA2607.211NL becomes
PA2607.211AHL).
4. The saturation current is the typical current which causes the induc-
tance to drop by 20% at the stated ambient temperatures (25°C and
100°C). This current is determined by placing the component in the
specified ambient environment and applying a short duration pulse current
(to eliminate self-heating effects) to the component.
5. The heating current is the DC current which causes the part temperature
to increase by approximately 40°C.
6. In high volt*time applications, additional heating in the component can
occur due to core losses in the inductor which may neccessitate derat-
ing the current in order to limit the temperature rise of the component. To
determine the approximate total losses (or temperature rise) for a given
application, the coreloss and temperature rise curves can be used.
7. Optional Tape & Reel packaging can be ordered by adding a “T” suf-
fix to the part number (i.e. PA2607.211NL becomes PA2607.211NLT).
Pulse complies to industry standard tape and reel specification EIA481.
The tape and reel for this product has a width (W=24mm), pitch
(Po=16.0mm) and depth (Ko=7.6mm).
8. The temperature of the component (ambient plus temperature rise) must
be within the stated operating temperature range.
Dimensions:
Inches
mm
Unless otherwise specified,
all tolerances are ±
.010
0,25
Weight ...........2.4 grams
Tape & Reel ........400/reel
PA2607.XXXNL
Mechanical Schematic
* Please note that marking shown is for the
PA2607.XXXNL parts. Marking for AHL parts is
the same except PA2607.XXXNL is replaced by
PA2607.XXXAHL.
Part
Number
Inductance
1
@ 0A
DC
(nH +/- 15%)
Inductance
@Irated
(nH TYP)
Irated
2
(ADC)
DCR
3
(mW nominal)
Saturation Current
4
(A TYP)
Heating Current
(A TYP)
Height
mm*
(inches)
25°C 100°C
PA2607.121NL 115 115 41
0.29 +/- 7% (.XXNL)
0.29 +/- 5% (.XXXAHL)
94 80
41
7.4*
(.291)
PA2607.151NL 150 150 41 72 61
PA2607.181NL 175 175 41 62 53
PA2607.211NL 215 195 41 48 41
7.3*
(.287)
PA2607.231NL 230 208 37 43 37
PA2607.271NL 270 241 31 37 34
PA2607.301NL 300 260 27 32 28
